[PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

This is a set of enhancements and fixes for the devicetrees of the Kontron
SL/BL i.MX8MM SoMs and boards.

Frieder Schrempf (8):
  arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
    SD card
  arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
    correct
  arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV
  arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators
  arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
  arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
  arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
  arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on

 .../dts/freescale/imx8mm-kontron-n801x-s.dts  | 41 ++++++++++++++++---
 .../freescale/imx8mm-kontron-n801x-som.dtsi   | 13 ++++--
 2 files changed, 44 insertions(+), 10 deletions(-)

-- 
2.33.0