Re: [PATCH 1/4] phy: mediatek: add support for phy-mtk-hdmi-mt8195

From: Guillaume Ranquet
Date: Fri Oct 01 2021 - 09:05:18 EST

Next message: Andy Shevchenko: "Re: [PATCH v2 1/3] serial: 8250: Handle UART without interrupt on TEMT using em485"
Previous message: Krzysztof Kozlowski: "[PATCH] regulator: dt-bindings: maxim,max8997: convert to dtschema"
In reply to: Vinod Koul: "Re: [PATCH 1/4] phy: mediatek: add support for phy-mtk-hdmi-mt8195"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Quoting Vinod Koul (2021-10-01 12:15:43)
> On 07-09-21, 10:37, Guillaume Ranquet wrote:
> > Add basic support for the mediatek hdmi phy on MT8195 SoC
> >
> > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > ---
> > drivers/phy/mediatek/Makefile | 1 +
> > drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 777 +++++++++++++++++++++
> > drivers/phy/mediatek/phy-mtk-hdmi-mt8195.h | 179 +++++
> > 3 files changed, 957 insertions(+)
> > create mode 100644 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > create mode 100644 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.h
> >
> > diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> > index ace660fbed3a..8024961160ad 100644
> > --- a/drivers/phy/mediatek/Makefile
> > +++ b/drivers/phy/mediatek/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
> > phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o
> > phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o
> > phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt8173.o
> > +phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt8195.o
> > obj-$(CONFIG_PHY_MTK_HDMI) += phy-mtk-hdmi-drv.o
> >
> > phy-mtk-mipi-dsi-drv-y := phy-mtk-mipi-dsi.o
> > diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > new file mode 100644
> > index 000000000000..0cb46ab29257
> > --- /dev/null
> > +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > @@ -0,0 +1,777 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
>
> 2021
>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/types.h>
> > +#include <linux/nvmem-consumer.h>
> > +
> > +#include "phy-mtk-hdmi-mt8195.h"
> > +#include "phy-mtk-hdmi.h"
> > +
> > +static inline bool mtk_hdmi_phy_readbit(struct mtk_hdmi_phy *hdmi_phy,
> > + unsigned short reg, unsigned int offset)
> > +{
> > + return (readl(hdmi_phy->regs + reg) & offset);
> > +}
> > +
> > +/*********Analog API export to HDMI Digital start*****/
> > +static void mtk_hdmi_ana_fifo_en(struct mtk_hdmi_phy *hdmi_phy)
> > +{
> > + /*make data fifo writable for hdmi2.0*/
>
> pls run checkpatch --strict to check for code style issues
>
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_ANA_CTL, reg_ana_hdmi20_fifo_en,
> > + reg_ana_hdmi20_fifo_en);
> > +}
> > +
> > +void mtk_tmds_high_bit_clk_ratio(struct mtk_hdmi_phy *hdmi_phy, bool enable)
> > +{
> > + mtk_hdmi_ana_fifo_en(hdmi_phy);
> > +
> > + /* HDMI 2.0 specification, 3.4Gbps <= TMDS Bit Rate <= 6G,
> > + * clock bit ratio 1:40, under 3.4Gbps, clock bit ratio 1:10
> > + */
>
> /*
> * I prefer this generic
> * kernel style, pls use this!
> */
>
> > + if (enable)
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI20_CLK_CFG,
> > + (0x2 << reg_txc_div_SHIFT), reg_txc_div);
> > + else
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI20_CLK_CFG, 0, reg_txc_div);
> > +}
> > +
> > +/*********Analog API export to HDMI Digital end*******/
> > +
> > +static int mtk_hdmi_pll_select_source(struct clk_hw *hw)
> > +{
> > + struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + 0x0 << REG_HDMITX_REF_XTAL_SEL_SHIFT,
> > + REG_HDMITX_REF_XTAL_SEL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + 0x0 << REG_HDMITX_REF_RESPLL_SEL_SHIFT,
> > + REG_HDMITX_REF_RESPLL_SEL);
>
> Have you looked into helpers in bitfield.h, they help in avoiding using
> these shift defines
>
> > +
> > + /*DA_HDMITX21_REF_CK for TXPLL input source*/
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_10,
> > + 0x0 << RG_HDMITXPLL_REF_CK_SEL_SHIFT,
> > + RG_HDMITXPLL_REF_CK_SEL);
> > +
> > + return 0;
> > +}
> > +
> > +static int mtk_hdmi_pll_performance_setting(struct clk_hw *hw)
> > +{
> > + struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> > +
> > + /* no matter pll input source is HDMIRX_REF_CK, xTal26M or TVD PLL,
> > + * the performance configuration is the same.
> > + * RG_HDMITXPLL_BP2 always 1'b1 = 0x1
> > + * RG_HDMITXPLL_BC[1:0] always 2'b11 = 0x3
> > + * RG_HDMITXPLL_IC[4:0] always 5'b00001 = 0x1
> > + * RG_HDMITXPLL_BR[2:0] stage treatment:
> > + * 24bit or 48bit->3'b001 = 0x1
> > + * 30bit or 36bit->3'b011 = 0x3
> > + * RG_HDMITXPLL_IR[4:0] stage treatment:
> > + * 24bit,30bit,48bit ->5'b00010 = 0x2
> > + * 36bit ->5'b00011 = 0x3
> > + * RG_HDMITXPLL_BP[3:0] always 4'b1111 = 0xf
> > + * RG_HDMITXPLL_IBAND_FIX_EN, RG_HDMITXPLL_RESERVE[14] always 2'b00 = 0x0
> > + * RG_HDMITXPLL_HIKVCO always 1'b1 = 0x1
> > + */
> > +
> > + /* BP2 */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_0,
> > + 0x1 << RG_HDMITXPLL_BP2_SHIFT, RG_HDMITXPLL_BP2);
> > +
> > + /* BC */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x3 << RG_HDMITXPLL_BC_SHIFT, RG_HDMITXPLL_BC);
> > +
> > + /* IC */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x1 << RG_HDMITXPLL_IC_SHIFT, RG_HDMITXPLL_IC);
> > +
> > + /* BR */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x2 << RG_HDMITXPLL_BR_SHIFT,
> > + RG_HDMITXPLL_BR);
> > +
> > + /* IR */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x2 << RG_HDMITXPLL_IR_SHIFT,
> > + RG_HDMITXPLL_IR);
> > +
> > + /* BP */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0xf << RG_HDMITXPLL_BP_SHIFT, RG_HDMITXPLL_BP);
> > +
> > + /* IBAND_FIX_EN, RESERVE[14] */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_0,
> > + 0x0 << RG_HDMITXPLL_IBAND_FIX_EN_SHIFT,
> > + RG_HDMITXPLL_IBAND_FIX_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + 0x0 << RG_HDMITXPLL_RESERVE_BIT14_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT14);
> > +
> > + /* HIKVCO */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x0 << RG_HDMITXPLL_HIKVCO_SHIFT,
> > + RG_HDMITXPLL_HIKVCO);
> > +
> > + /* HREN */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_0,
> > + 0x1 << RG_HDMITXPLL_HREN_SHIFT, RG_HDMITXPLL_HREN);
> > +
> > + /* LVR_SEL */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_0,
> > + 0x1 << RG_HDMITXPLL_LVR_SEL_SHIFT,
> > + RG_HDMITXPLL_LVR_SEL);
> > +
> > + /* RG_HDMITXPLL_RESERVE[12:11] */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + 0x3 << RG_HDMITXPLL_RESERVE_BIT12_11_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT12_11);
> > +
> > + /* TCL_EN */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_0,
> > + 0x1 << RG_HDMITXPLL_TCL_EN_SHIFT,
> > + RG_HDMITXPLL_TCL_EN);
> > +
> > + /* disable read calibration impedance from efuse */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_1,
> > + 0x1f << RG_INTR_IMP_RG_MODE_SHIFT,
> > + RG_INTR_IMP_RG_MODE);
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +mtk_hdmi_pll_set_hw(struct clk_hw *hw,
> > + unsigned char prediv,
> > + unsigned char fbkdiv_high, unsigned long fbkdiv_low,
> > + unsigned char fbkdiv_hs3, unsigned char posdiv1,
> > + unsigned char posdiv2, unsigned char txprediv,
> > + unsigned char txposdiv, unsigned char digital_div)
> > +{
> > + unsigned char txposdiv_value = 0;
> > + unsigned char div3_ctrl_value = 0;
> > + unsigned char posdiv_vallue = 0;
> > + unsigned char div_ctrl_value = 0;
> > + unsigned char reserve_3_2_value = 0;
> > + unsigned char prediv_value = 0;
> > + unsigned char reserve13_value = 0;
> > +
> > + struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> > +
> > + mtk_hdmi_pll_select_source(hw);
> > +
> > + mtk_hdmi_pll_performance_setting(hw);
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_10,
> > + 0x2 << RG_HDMITX21_BIAS_PE_BG_VREF_SEL_SHIFT,
> > + RG_HDMITX21_BIAS_PE_BG_VREF_SEL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_10,
> > + 0x0 << RG_HDMITX21_VREF_SEL_SHIFT,
> > + RG_HDMITX21_VREF_SEL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_9,
> > + 0x2 << RG_HDMITX21_SLDO_VREF_SEL_SHIFT,
> > + RG_HDMITX21_SLDO_VREF_SEL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_10,
> > + 0x0 << RG_HDMITX21_BIAS_PE_VREF_SELB_SHIFT,
> > + RG_HDMITX21_BIAS_PE_VREF_SELB);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_3,
> > + 0x1 << RG_HDMITX21_SLDOLPF_EN_SHIFT,
> > + RG_HDMITX21_SLDOLPF_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_6,
> > + 0x11 << RG_HDMITX21_INTR_CAL_SHIFT,
> > + RG_HDMITX21_INTR_CAL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_2,
> > + 0x1 << RG_HDMITXPLL_PWD_SHIFT, RG_HDMITXPLL_PWD);
> > +
> > + /* TXPOSDIV */
> > + if (txposdiv == 1)
> > + txposdiv_value = 0x0;
> > + else if (txposdiv == 2)
> > + txposdiv_value = 0x1;
> > + else if (txposdiv == 4)
> > + txposdiv_value = 0x2;
> > + else if (txposdiv == 8)
> > + txposdiv_value = 0x3;
> > + else
> > + return -EINVAL;
>
> switch seems apt for this!
>
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_6,
> > + txposdiv_value << RG_HDMITX21_TX_POSDIV_SHIFT,
> > + RG_HDMITX21_TX_POSDIV);
> > +
> > + /* /5, tmds_clk_frequency = tmds_data_frequency / 5 */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_6,
> > + 0x1 << RG_HDMITX21_TX_POSDIV_EN_SHIFT,
> > + RG_HDMITX21_TX_POSDIV_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_CFG_6,
> > + 0x0 << RG_HDMITX21_FRL_EN_SHIFT, RG_HDMITX21_FRL_EN);
> > +
> > + /* TXPREDIV */
> > + if (txprediv == 2) {
> > + div3_ctrl_value = 0x0;
> > + posdiv_vallue = 0x0;
> > + } else if (txprediv == 4) {
> > + div3_ctrl_value = 0x0;
> > + posdiv_vallue = 0x1;
> > + } else if (txprediv == 6) {
> > + div3_ctrl_value = 0x1;
> > + posdiv_vallue = 0x0;
> > + } else if (txprediv == 12) {
> > + div3_ctrl_value = 0x1;
> > + posdiv_vallue = 0x1;
> > + } else
> > + return -EINVAL;
>
> here too
>
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_4,
> > + div3_ctrl_value
> > + << RG_HDMITXPLL_POSDIV_DIV3_CTRL_SHIFT,
> > + RG_HDMITXPLL_POSDIV_DIV3_CTRL);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_4,
> > + posdiv_vallue << RG_HDMITXPLL_POSDIV_SHIFT,
> > + RG_HDMITXPLL_POSDIV);
> > +
> > + /* POSDIV1 */
> > + if (posdiv1 == 5)
> > + div_ctrl_value = 0x0;
> > + else if (posdiv1 == 10)
> > + div_ctrl_value = 0x1;
> > + else if (posdiv1 == (125 / 10))
> > + div_ctrl_value = 0x2;
> > + else if (posdiv1 == 15)
> > + div_ctrl_value = 0x3;
> > + else
> > + div_ctrl_value = 0x1;
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_4,
> > + div_ctrl_value << RG_HDMITXPLL_DIV_CTRL_SHIFT,
> > + RG_HDMITXPLL_DIV_CTRL);
> > +
> > + /* DE add new setting */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + 0x0 << RG_HDMITXPLL_RESERVE_BIT14_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT14);
> > +
> > + /* POSDIV2 */
> > + if (posdiv2 == 1)
> > + reserve_3_2_value = 0x0;
> > + else if (posdiv2 == 2)
> > + reserve_3_2_value = 0x1;
> > + else if (posdiv2 == 4)
> > + reserve_3_2_value = 0x2;
> > + else if (posdiv2 == 6)
> > + reserve_3_2_value = 0x3;
> > + else
> > + reserve_3_2_value = 0x1;
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + reserve_3_2_value
> > + << RG_HDMITXPLL_RESERVE_BIT3_2_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT3_2);
> > +
> > + /* DE add new setting */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + 0x2 << RG_HDMITXPLL_RESERVE_BIT1_0_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT1_0);
> > +
> > + /* PREDIV */
> > + if (prediv == 1)
> > + prediv_value = 0x0;
> > + else if (prediv == 2)
> > + prediv_value = 0x1;
> > + else if (prediv == 4)
> > + prediv_value = 0x2;
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_4,
> > + prediv_value << RG_HDMITXPLL_PREDIV_SHIFT,
> > + RG_HDMITXPLL_PREDIV);
> > +
> > + /* FBKDIV_HS3 */
> > + if (fbkdiv_hs3 == 1)
> > + reserve13_value = 0x0;
> > + else if (fbkdiv_hs3 == 2)
> > + reserve13_value = 0x1;
> > + else
> > + return -EINVAL;
> > +
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_1,
> > + reserve13_value << RG_HDMITXPLL_RESERVE_BIT13_SHIFT,
> > + RG_HDMITXPLL_RESERVE_BIT13);
> > +
> > + /* FBDIV */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_4,
> > + fbkdiv_high << RG_HDMITXPLL_FBKDIV_high_SHIFT,
> > + RG_HDMITXPLL_FBKDIV_high);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_1_PLL_CFG_3,
> > + fbkdiv_low << RG_HDMITXPLL_FBKDIV_low_SHIFT,
> > + RG_HDMITXPLL_FBKDIV_low);
> > +
> > + /* Digital DIVIDER */
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + 0x0 << REG_PIXEL_CLOCK_SEL_SHIFT,
> > + REG_PIXEL_CLOCK_SEL);
> > +
> > + if (digital_div == 1)
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + 0x0 << REG_HDMITX_PIXEL_CLOCK_SHIFT,
> > + REG_HDMITX_PIXEL_CLOCK);
> > + else {
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + 0x1 << REG_HDMITX_PIXEL_CLOCK_SHIFT,
> > + REG_HDMITX_PIXEL_CLOCK);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CTL_3,
> > + (digital_div - 1) << REG_HDMITXPLL_DIV_SHIFT,
> > + REG_HDMITXPLL_DIV);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +#define PCW_DECIMAL_WIDTH 24
> > +
> > +static int mtk_hdmi_pll_calculate_params(struct clk_hw *hw,
> > + unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + int ret;
> > + unsigned long long tmds_clk = 0;
> > + unsigned long long pixel_clk = 0;
> > + //ref clock from hdmi Rx
>
> :(
>
> --
> ~Vinod

Hi Vinod.

Thanks for your review.
I've posted a V1 [1] this week that should answer your comments.

I'm sorry if I messed up, I'm not really used to the linux community
upstream process.

Hope I can do better next time :)

Thx,
Guillaume.

[1] : https://lore.kernel.org/linux-mediatek/20210929094425.745-1-granquet@xxxxxxxxxxxx/

Next message: Andy Shevchenko: "Re: [PATCH v2 1/3] serial: 8250: Handle UART without interrupt on TEMT using em485"
Previous message: Krzysztof Kozlowski: "[PATCH] regulator: dt-bindings: maxim,max8997: convert to dtschema"
In reply to: Vinod Koul: "Re: [PATCH 1/4] phy: mediatek: add support for phy-mtk-hdmi-mt8195"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]