[PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings

[cy_huang]

From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Add initial bindings for rt9120 audio amplifier.

Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
---
 .../devicetree/bindings/sound/richtek,rt9120.yaml  | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml

diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
new file mode 100644
index 00000000..4d47a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9120 Class-D audio amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
+
+description: |
+  The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
+  delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
+  voltage  range from 4.5V to 26.4V to meet the need on most common
+  applications like as TV, monitors. home entertainment, electronic music
+  equipment.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9120
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  pwdnn-gpios:
+    description: GPIO used for power down, low active
+    maxItems: 1
+
+  richtek,use-dvdd-1p8v:
+    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rt9120@1a {
+        compatible = "richtek,rt9120";
+        reg = <0x1a>;
+        pwdnn-gpios = <&gpio26 2 0>;
+        richtek,use-dvdd-1p8v;
+      };
+    };
-- 
2.7.4