[PATCH v1 2/6] mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield

[Andy Shevchenko]

Intel Merrifield platform had been converted to use ACPI enumeration.
However, the driver missed an update to retrieve card detect GPIO.
Fix it here.

Unfortunately we can't rely on CD GPIO state because there are two
different PCB designs in the wild that are using an opposite card
detection sense and there is no way to distinguish those platforms,
that's why ignore CD GPIO completely and use it only as an card plug
or unplug event.

Fixes: 4590d98f5a4f ("sfi: Remove framework for deprecated firmware")
BugLink: https://github.com/edison-fw/meta-intel-edison/issues/135
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-pci-core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index be19785227fe..70ab0a7a3de8 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1341,6 +1341,14 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot)
 					 MMC_CAP_1_8V_DDR;
 		break;
 	case INTEL_MRFLD_SD:
+		slot->cd_idx = 0;
+		/*
+		 * There are two PCB designs of SD card slot with the opposite
+		 * card detection sense. Quirk this out by ignoring GPIO state
+		 * completely.
+		 */
+		slot->host->quirks2 |= SDHCI_QUIRK_CARD_DETECTION_IF_GPIO_LOW |
+				       SDHCI_QUIRK_CARD_DETECTION_IF_GPIO_HIGH;
 		slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 		break;
 	case INTEL_MRFLD_SDIO:
-- 
2.33.0