[PATCH v2 0/4] Add support for the Mercury+ AA1 module

[Paweł Anikiel]

The following patches add support for the Mercury+ AA1 with an
Arria 10 SoCFPGA.

This version differs from the previous one by removing the spi
flash node, renaming the memory and mdio nodes, adding gpio nodes,
and adding a bus number property to Synopsys DesignWare i2c
controller node.

Paweł Anikiel (4):
  i2c: check bus number property in DesignWare I2C Controller
  dt-bindings: add bus number property
  reset: socfpga: add empty driver allowing consumers to probe
  dts: socfpga: Add Mercury+ AA1 devicetree

 .../bindings/i2c/snps,designware-i2c.yaml     |  5 +
 arch/arm/boot/dts/Makefile                    |  1 +
 .../boot/dts/socfpga_arria10_mercury_aa1.dts  | 99 +++++++++++++++++++
 drivers/i2c/busses/i2c-designware-platdrv.c   |  3 +-
 drivers/reset/reset-socfpga.c                 | 26 +++++
 5 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts

-- 
2.25.1