[PATCH v1] usb: core: hub: improve port over-current alert msg

[Flavio Suligoi]

At the moment the port over-current message is
displayed only if the over-current condition is permanent.

But in case of permanent short-circuit or
over-current, some USB power-distribution switches
(such as the TPS20xx, etc.), after the over-current
detection and the consequent shutdown, return
in the normal state.

So, in these cases, the over-current error message
never appears.

To overcome this problem, the "over-current condition"
message is displayed even after some over-current events.

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
---
 arch/arm64/boot/dts/Makefile | 1 +
 drivers/usb/core/hub.c       | 5 +++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 639e01a4d855..bf26ce60d78a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -8,6 +8,7 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += asem
 subdir-y += bitmain
 subdir-y += broadcom
 subdir-y += cavium
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 86658a81d284..ff6c8e0e2673 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5577,7 +5577,8 @@ static void port_event(struct usb_hub *hub, int port1)
 		msleep(100);	/* Cool down */
 		hub_power_on(hub, true);
 		hub_port_status(hub, port1, &status, &unused);
-		if (status & USB_PORT_STAT_OVERCURRENT)
+		if ((status & USB_PORT_STAT_OVERCURRENT) ||
+		    !(port_dev->over_current_count % 15))
 			dev_err(&port_dev->dev, "over-current condition\n");
 	}
 
@@ -5738,7 +5739,7 @@ static void hub_event(struct work_struct *work)
 			u16 status = 0;
 			u16 unused;
 
-			dev_dbg(hub_dev, "over-current change\n");
+			dev_info(hub_dev, "over-current change\n");
 			clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
 			msleep(500);	/* Cool down */
 			hub_power_on(hub, true);
-- 
2.25.1