Re: [PATCH v1 1/2] i2c:busses:Register PCI1XXXX adapter to I2C subsystem

[Andy Shevchenko]

On Thu, Oct 07, 2021 at 07:40:04PM +0300, Dmitry Osipenko wrote:
> 29.09.2021 09:22, LakshmiPraveen Kopparthi пишет:

...

> > +static int pci1xxxx_i2c_suspend(struct device *dev)
> > +{
> > +	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);
> > +	struct pci_dev *pdev = to_pci_dev(dev);

How pdev is used?

> > +	u32 regval;
> > +
> > +	i2c_mark_adapter_suspended(&i2c->adap);
> > +
> > +	pci1xxxx_ack_high_level_intr(i2c, ALL_HIGH_LAYER_INTR);
> > +	pci1xxxx_i2c_config_high_level_intr(i2c, ALL_HIGH_LAYER_INTR, false);
> > +
> > +	/*
> > +	 * Enable the PERST_DIS bit to mask the PERST from
> > +	 * resetting the core regs
> > +	 */
> > +	regval = readl(i2c->i2c_base + SMBUS_RESET_REG);
> > +	regval |= PERI_SMBUS_D3_RESET_DIS;
> > +	writel(regval, i2c->i2c_base + SMBUS_RESET_REG);
> > +
> > +	return 0;
> > +}
> > +
> > +static int pci1xxxx_i2c_resume(struct device *dev)
> > +{
> > +	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);

> > +	struct pci_dev *pdev = to_pci_dev(dev);

Ditto.

> > +	u32 regval;
> > +
> > +	i2c_mark_adapter_resumed(&i2c->adap);
> > +
> > +	regval = readl(i2c->i2c_base + SMBUS_RESET_REG);
> > +	regval &= ~PERI_SMBUS_D3_RESET_DIS;
> > +	writel(regval, i2c->i2c_base + SMBUS_RESET_REG);
> > +
> > +	return 0;
> > +}

-- 
With Best Regards,
Andy Shevchenko