[PATCH v3 0/3] ARM: prepare and add netgear gs110emx support

[Marcel Ziswiler]

Cleanup mvebu_v7_defconfig and then add support for the Netgear
GS110EMX which is an 8 port Gigabit switch with two additional
Multi-Gig ports. An 88E6390X switch sits at its core connecting to two
88X3310P 10G PHYs while the control plane is handled by an 88F6811
Armada 381 SoC.

Changes in v3:
- Got rid of unused 3.3 volt regulator as suggested by Andrew.
- Got rid of partitioning comment.
- Added switch interrupt GPIO configuration.

Changes in v2:
- Add Andrew's reviewed-by tag.
- Add Andrew's reviewed-by tag.
- Send previous first patch separately to netdev mailing list as
  suggested by Andrew.
- Fix numbering of the PHY labels as suggested by Andrew.

Marcel Ziswiler (3):
  ARM: mvebu_v7_defconfig: enable mtd physmap
  ARM: mvebu_v7_defconfig: rebuild default configuration
  ARM: dts: mvebu: add device tree for netgear gs110emx switch

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/armada-381-netgear-gs110emx.dts  | 295 ++++++++++++++++++
 arch/arm/configs/mvebu_v7_defconfig           |  18 +-
 3 files changed, 304 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/boot/dts/armada-381-netgear-gs110emx.dts

-- 
2.26.2