Re: [PATCH v7 2/2] hwmon: (nct7802) Make temperature/voltage sensors configurable

From: Oskar Senft
Date: Sun Oct 10 2021 - 21:53:35 EST

I wasn't sure if submitting JUST a v7 of nuvoton,nct7802.yaml (i.e.
the 1/2 in this series) would be the right thing to do and thought it
would be easier to follow if I dropped both. I couldn't find
documentation on what's the right thing to do in that case. Would it
have been better to only submit nuvoton,nct7802.yaml as "PATCH v7" ?

Oskar.

On Sun, Oct 10, 2021 at 9:49 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 10/10/21 6:22 PM, Oskar Senft wrote:
> > This change allows LTD and RTD inputs to be configured via
> > device tree bindings. If the DT bindings are not present or
> > invalid, the input configuration is not modified and left at
> > HW defaults.
> >
> > Signed-off-by: Oskar Senft <osk@xxxxxxxxxx>
>
> I sent a Reviewed-by: for v6 of this patch.
>
> > ---
> > Changes from PATCH v6:
> > - None (resubmitted due to changes in nuvoton,nct7802.yaml).
> >
>
> Why did you drop it if there was no change ?
>
> Guenter
>
> > Changes from PATCH v5:
> > - Removed unused "found_channel_config" variable.
> > - Initialize mode_mask and mode_val to defaults.
> > ---
> > drivers/hwmon/nct7802.c | 129 ++++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 125 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
> > index 604af2f6103a..d56f78327619 100644
> > --- a/drivers/hwmon/nct7802.c
> > +++ b/drivers/hwmon/nct7802.c
> > @@ -51,6 +51,23 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
> > #define REG_CHIP_ID 0xfe
> > #define REG_VERSION_ID 0xff
> >
> > +/*
> > + * Resistance temperature detector (RTD) modes according to 7.2.32 Mode
> > + * Selection Register
> > + */
> > +#define RTD_MODE_CURRENT 0x1
> > +#define RTD_MODE_THERMISTOR 0x2
> > +#define RTD_MODE_VOLTAGE 0x3
> > +
> > +#define MODE_RTD_MASK 0x3
> > +#define MODE_LTD_EN 0x40
> > +
> > +/*
> > + * Bit offset for sensors modes in REG_MODE.
> > + * Valid for index 0..2, indicating RTD1..3.
> > + */
> > +#define MODE_BIT_OFFSET_RTD(index) ((index) * 2)
> > +
> > /*
> > * Data structures and manipulation thereof
> > */
> > @@ -1038,7 +1055,112 @@ static const struct regmap_config nct7802_regmap_config = {
> > .volatile_reg = nct7802_regmap_is_volatile,
> > };
> >
> > -static int nct7802_init_chip(struct nct7802_data *data)
> > +static int nct7802_get_channel_config(struct device *dev,
> > + struct device_node *node, u8 *mode_mask,
> > + u8 *mode_val)
> > +{
> > + u32 reg;
> > + const char *type_str, *md_str;
> > + u8 md;
> > +
> > + if (!node->name || of_node_cmp(node->name, "channel"))
> > + return 0;
> > +
> > + if (of_property_read_u32(node, "reg", &reg)) {
> > + dev_err(dev, "Could not read reg value for '%s'\n",
> > + node->full_name);
> > + return -EINVAL;
> > + }
> > +
> > + if (reg > 3) {
> > + dev_err(dev, "Invalid reg (%u) in '%s'\n", reg,
> > + node->full_name);
> > + return -EINVAL;
> > + }
> > +
> > + if (reg == 0) {
> > + if (!of_device_is_available(node))
> > + *mode_val &= ~MODE_LTD_EN;
> > + else
> > + *mode_val |= MODE_LTD_EN;
> > + *mode_mask |= MODE_LTD_EN;
> > + return 0;
> > + }
> > +
> > + /* At this point we have reg >= 1 && reg <= 3 */
> > +
> > + if (!of_device_is_available(node)) {
> > + *mode_val &= ~(MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1));
> > + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
> > + return 0;
> > + }
> > +
> > + if (of_property_read_string(node, "sensor-type", &type_str)) {
> > + dev_err(dev, "No type for '%s'\n", node->full_name);
> > + return -EINVAL;
> > + }
> > +
> > + if (!strcmp(type_str, "voltage")) {
> > + *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK)
> > + << MODE_BIT_OFFSET_RTD(reg - 1);
> > + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
> > + return 0;
> > + }
> > +
> > + if (strcmp(type_str, "temperature")) {
> > + dev_err(dev, "Invalid type '%s' for '%s'\n", type_str,
> > + node->full_name);
> > + return -EINVAL;
> > + }
> > +
> > + if (reg == 3) {
> > + /* RTD3 only supports thermistor mode */
> > + md = RTD_MODE_THERMISTOR;
> > + } else {
> > + if (of_property_read_string(node, "temperature-mode",
> > + &md_str)) {
> > + dev_err(dev, "No mode for '%s'\n", node->full_name);
> > + return -EINVAL;
> > + }
> > +
> > + if (!strcmp(md_str, "thermal-diode"))
> > + md = RTD_MODE_CURRENT;
> > + else if (!strcmp(md_str, "thermistor"))
> > + md = RTD_MODE_THERMISTOR;
> > + else {
> > + dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str,
> > + node->full_name);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + *mode_val |= (md & MODE_RTD_MASK) << MODE_BIT_OFFSET_RTD(reg - 1);
> > + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
> > +
> > + return 0;
> > +}
> > +
> > +static int nct7802_configure_channels(struct device *dev,
> > + struct nct7802_data *data)
> > +{
> > + /* Enable local temperature sensor by default */
> > + u8 mode_mask = MODE_LTD_EN, mode_val = MODE_LTD_EN;
> > + struct device_node *node;
> > + int err;
> > +
> > + if (dev->of_node) {
> > + for_each_child_of_node(dev->of_node, node) {
> > + err = nct7802_get_channel_config(dev, node, &mode_mask,
> > + &mode_val);
> > + if (err)
> > + return err;
> > + }
> > + }
> > +
> > + return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val);
> > +}
> > +
> > +static int nct7802_init_chip(struct device *dev, struct nct7802_data *data)
> > {
> > int err;
> >
> > @@ -1047,8 +1169,7 @@ static int nct7802_init_chip(struct nct7802_data *data)
> > if (err)
> > return err;
> >
> > - /* Enable local temperature sensor */
> > - err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40);
> > + err = nct7802_configure_channels(dev, data);
> > if (err)
> > return err;
> >
> > @@ -1074,7 +1195,7 @@ static int nct7802_probe(struct i2c_client *client)
> > mutex_init(&data->access_lock);
> > mutex_init(&data->in_alarm_lock);
> >
> > - ret = nct7802_init_chip(data);
> > + ret = nct7802_init_chip(dev, data);
> > if (ret < 0)
> > return ret;
> >
> >
>