Re: [RFC v2] mt76: mt7615: mt7622: fix ibss and meshpoint

[Nick]

My tests on todays OpenWrt Trunk with my and without my patch showed:
- MT7622: AP + AdHoc (only AP is working, in every case)
- BPI-MT7615: AP + AdHoc (with and without my patch still works).

I thought something would change if I apply my patch with the 
HW-Addresses. However everything stays the same:

With my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: address: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Without my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Bests
Nick

On 10/9/21 15:22, Daniel Golle wrote:
> On Sat, Oct 09, 2021 at 12:37:53PM +0200, Nick wrote:
> > On 10/9/21 10:32, Kalle Valo wrote:
> >
> > > Nick Hainke <vincent@xxxxxxxxxxxx> writes:
> > >
> > > > Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces").
> > > The fixes tag should be in the end, before Signed-off-by tags. But I can
> > > fix that during commit.
> > Thanks for feedback. Already changed that locally but I did not want to spam
> > you with another RFC v3. :)
> > I was able to organize me a BPI-MT7615 PCIE Express Card. With and without
> > this patch beacons were sent on the mt7615 pcie, so the patch did not make
> > any difference. However, the mt7622 wifi will only work with my patch.
> Does Mesh+AP or Ad-Hoc+AP also work on MT7622 and does it still work on
> MT7615E card with your patch applied?