[PATCH 10/22] PCI: mvebu: Use SET_PCI_ERROR_RESPONSE() when device not found

[Naveen Naidu]

An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty
read occurs.

This helps unify PCI error response checking and make error check
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@xxxxxxxxx>
---
 drivers/pci/controller/pci-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index ed13e81cd691..51d61194a31a 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -654,7 +654,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 
 	port = mvebu_pcie_find_port(pcie, bus, devfn);
 	if (!port) {
-		*val = 0xffffffff;
+		SET_PCI_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
@@ -664,7 +664,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 						 size, val);
 
 	if (!mvebu_pcie_link_up(port)) {
-		*val = 0xffffffff;
+		SET_PCI_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-- 
2.25.1