[PATCH v2 3/5] mtd: rawnand/davinci: Rewrite function description

[Paul Cercueil]

The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.

Cc: <stable@xxxxxxxxxxxxxxx> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/davinci_nand.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 2e6a0c1671be..fe2511cdcae3 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -372,17 +372,15 @@ static int nand_davinci_correct_4bit(struct nand_chip *chip, u_char *data,
 }
 
 /**
- * nand_read_page_hwecc_oob_first - hw ecc, read oob first
+ * nand_davinci_read_page_hwecc_oob_first - Hardware ECC page read with ECC
+ *                                          data read from OOB area
  * @chip: nand chip info structure
  * @buf: buffer to store read data
  * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
- * Hardware ECC for large page chips, require OOB to be read first. For this
- * ECC mode, the write_page method is re-used from ECC_HW. These methods
- * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
- * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
- * the data area, by overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, which requires the ECC data to be
+ * extracted from the OOB before the actual data is read.
  */
 static int nand_davinci_read_page_hwecc_oob_first(struct nand_chip *chip,
 						  uint8_t *buf,
-- 
2.33.0