Re: [PATCH 7/8] arm64: dts: qcom: msm8996: Add MSM8996 Pro support

[Dmitry Baryshkov]

On Sat, 16 Oct 2021 at 17:51, Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> wrote:
>
>
> On Fri, Oct 15 2021 at 23:01:54 +0400, Konrad Dybcio
> <konrad.dybcio@xxxxxxxxxxxxxx> wrote:
> >
> > On 14.10.2021 10:32, Yassine Oudjana wrote:
> >>  Add a new DTSI for MSM8996 Pro (MSM8996SG) with msm-id and CPU/GPU
> >> OPPs.
> >>  CBF OPPs and CPR parameters will be added to it as well once
> >> support for
> >>  CBF scaling and CPR is introduced.
> >>
> >>  Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
> >>  ---
> >>   arch/arm64/boot/dts/qcom/msm8996.dtsi    |  82 +++----
> >>   arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 281
> >> +++++++++++++++++++++++
> >>   2 files changed, 322 insertions(+), 41 deletions(-)
> >>   create mode 100644 arch/arm64/boot/dts/qcom/msm8996pro.dtsi
> >>
> >>  diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> >> b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> >>  index 94a846c3f1ee..5b2600a4fb2a 100644
> >>  --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> >>  +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> >>  @@ -142,82 +142,82 @@ cluster0_opp: opp_table0 {
> >>              /* Nominal fmax for now */
> >>              opp-307200000 {
> >>                      opp-hz = /bits/ 64 <307200000>;
> >>  -                   opp-supported-hw = <0x77>;
> >>  +                   opp-supported-hw = <0x7>;
> >
> > You didn't describe what's the reason for changing this everywhere.
> >
> > If it's been always broken, perhaps make it a separate commit
> > describing
> >
> > the issue.
> >
> >
> > Konrad
> >
>
> Before removing reading msm-id in qcom_cpufreq_nvmem, bits 0-2 (0x07)
> were MSM8996 speed bins, while bits 4-6 (0x70) were MSM8996 Pro speed
> bins. Now, only bits 0-2 are used for either one, so basically I moved
> bits 4-6 into msm8996pro.dtsi after shifting them right to become bits
> 0-2.
>
> I'll put this in a separate patch and describe the change.

Could you please describe in the commit message why is it changed?
IOW, what prompted you to split 8996SG support from main msm8996.dtsi?

-- 
With best wishes
Dmitry