[PATCH v2 2/7] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log

[Jammy Huang]

The debug log level, 0~3, is controlled by module_param, debug.
Higher the value, more the information.

Signed-off-by: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
---
 drivers/media/platform/aspeed-video.c | 40 +++++++++++++++------------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 6259cf17a7cc..642ca96c8c52 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -30,6 +30,7 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-dma-contig.h>
+#include <linux/videodev2.h>
 
 #define DEVICE_NAME			"aspeed-video"
 
@@ -390,6 +391,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
 	},
 };
 
+static unsigned int debug;
+
 static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
 {
 	int i;
@@ -437,23 +440,23 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
 	t &= ~clear;
 	t |= bits;
 	writel(t, video->base + reg);
-	dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "update %03x[%08x -> %08x]\n",
+		 reg, before, readl(video->base + reg));
 }
 
 static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
 {
 	u32 t = readl(video->base + reg);
 
-	dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
+	v4l2_dbg(3, debug, &video->v4l2_dev, "read %03x[%08x]\n", reg, t);
 	return t;
 }
 
 static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
 {
 	writel(val, video->base + reg);
-	dev_dbg(video->dev, "write %03x[%08x]\n", reg,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "write %03x[%08x]\n", reg,
+		 readl(video->base + reg));
 }
 
 static void update_perf(struct aspeed_video_perf *p)
@@ -474,13 +477,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 	u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
 
 	if (video->v4l2_input_status) {
-		dev_dbg(video->dev, "No signal; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
 		return 0;
 	}
 
 	if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
 	    !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
-		dev_dbg(video->dev, "Engine busy; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n");
 		return -EBUSY;
 	}
 
@@ -489,7 +492,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 				       struct aspeed_video_buffer, link);
 	if (!buf) {
 		spin_unlock_irqrestore(&video->lock, flags);
-		dev_dbg(video->dev, "No buffers; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n");
 		return -EPROTO;
 	}
 
@@ -565,7 +568,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
 
 static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 {
-	dev_dbg(video->dev, "Resolution changed; resetting\n");
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Resolution changed; resetting\n");
 
 	set_bit(VIDEO_RES_CHANGE, &video->flags);
 	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
@@ -766,8 +769,8 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
 	aspeed_video_write(video, VE_STREAM_BUF_SIZE,
 			   compression_buffer_size_reg);
 
-	dev_dbg(video->dev, "Max compressed size: %x\n",
-		video->max_compressed_size);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Max compressed size: %#x\n",
+		 video->max_compressed_size);
 }
 
 #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
@@ -804,7 +807,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      res_check(video),
 						      MODE_DETECT_TIMEOUT);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; first mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n");
 			clear_bit(VIDEO_RES_DETECT, &video->flags);
 			return;
 		}
@@ -822,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      MODE_DETECT_TIMEOUT);
 		clear_bit(VIDEO_RES_DETECT, &video->flags);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; second mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n");
 			return;
 		}
 
@@ -856,7 +859,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	} while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
 
 	if (invalid_resolution) {
-		dev_dbg(video->dev, "Invalid resolution detected\n");
+		v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n");
 		return;
 	}
 
@@ -873,8 +876,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	aspeed_video_update(video, VE_SEQ_CTRL, 0,
 			    VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
 
-	dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
-		det->height);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
+		 det->width, det->height);
 }
 
 static void aspeed_video_set_resolution(struct aspeed_video *video)
@@ -1501,7 +1504,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
 				!test_bit(VIDEO_FRAME_INPRG, &video->flags),
 				STOP_TIMEOUT);
 	if (!rc) {
-		dev_dbg(video->dev, "Timed out when stopping streaming\n");
+		v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n");
 
 		/*
 		 * Need to force stop any DMA and try and get HW into a good
@@ -1856,6 +1859,9 @@ static struct platform_driver aspeed_video_driver = {
 
 module_platform_driver(aspeed_video_driver);
 
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-3)");
+
 MODULE_DESCRIPTION("ASPEED Video Engine Driver");
 MODULE_AUTHOR("Eddie James");
 MODULE_LICENSE("GPL v2");
-- 
2.25.1