Re: [RFC] perf arm-spe: Track task context switch for cpu-mode events

From: German Gomez
Date: Mon Oct 18 2021 - 07:01:35 EST


Hi,

What do you thing of the patch below? PERF_RECORD_SWITCH events are also
included for tracing forks. The patch would sit on top of Namhyung's.

Thanks,
German

On 12/10/2021 12:07, German Gomez wrote:
> Hi, Leo and Namhyung,
>
> I want to make sure I'm on the same page as you regarding this topic.
>
> [...]
>
> If we are not considering patching the driver at this stage, so we allow
> hardware tracing on non-root namespaces. I think we could proceed like
> this:
>
>   - For userspace, always use context-switch events as they are
>     accurate and consistent with namespaces.
>   - For kernel tracing, if context packets are enabled, use them, but
>     warn the user that the PIDs correspond to the root namespace.
>   - Otherwise, use context-switch events and warn the user of the time
>     inaccuracies.
>
> Later, if the driver is patched to disable context packets outside the
> root namespace, kernel tracing could fall back to using context-switch
> events and warn the user with a single message about the time
> inaccuracies.
>
> If we are aligned, we could collect your feedback and share an updated
> patch that considers the warnings.
>
> Many thanks
> Best regards

---
 tools/perf/util/arm-spe.c | 66 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 63 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
index 708323d7c93c..6a2f7a484a80 100644
--- a/tools/perf/util/arm-spe.c
+++ b/tools/perf/util/arm-spe.c
@@ -71,6 +71,17 @@ struct arm_spe {
     u64                kernel_start;
 
     unsigned long            num_events;
+
+    /*
+     * Used for PID tracing.
+     */
+    u8                exclude_kernel;
+
+    /*
+     * Warning messages.
+     */
+    u8                warn_context_pkt_namesapce;
+    u8                warn_context_switch_ev_accuracy;
 };
 
 struct arm_spe_queue {
@@ -586,11 +597,42 @@ static bool arm_spe__is_timeless_decoding(struct arm_spe *spe)
     return timeless_decoding;
 }
 
+static bool arm_spe__is_exclude_kernel(struct arm_spe *spe) {
+    struct evsel *evsel;
+    struct evlist *evlist = spe->session->evlist;
+
+    evlist__for_each_entry(evlist, evsel) {
+    if (evsel->core.attr.type == spe->pmu_type && evsel->core.attr.exclude_kernel)
+        return true;
+    }
+
+    return false;
+}
+
 static void arm_spe_set_pid_tid_cpu(struct arm_spe *spe,
                     struct auxtrace_queue *queue)
 {
     struct arm_spe_queue *speq = queue->priv;
-    pid_t tid;
+    pid_t tid = machine__get_current_tid(spe->machine, speq->cpu);
+    u64 context_id = speq->decoder->record.context_id;
+
+    /*
+    * We're tracing the kernel.
+    */
+    if (!spe->exclude_kernel) {
+        /*
+         * Use CONTEXT packets in kernel tracing if available and warn the user of the
+         * values correspond to the root PID namespace.
+         *
+         * If CONTEXT packets aren't available but context-switch events are, warn the user
+         * of the time inaccuracies.
+         */
+        if (context_id != (u64) -1) {
+            tid = speq->decoder->record.context_id;
+            spe->warn_context_pkt_namesapce = true;
+        } else if (tid != -1 && context_id == (u64) -1)
+            spe->warn_context_switch_ev_accuracy = true;
+    }
 
     tid = machine__get_current_tid(spe->machine, speq->cpu);
     if (tid != -1) {
@@ -740,7 +782,8 @@ static int arm_spe_process_event(struct perf_session *session,
         if (err)
             return err;
 
-        if (event->header.type == PERF_RECORD_SWITCH_CPU_WIDE)
+        if (event->header.type == PERF_RECORD_SWITCH_CPU_WIDE ||
+            event->header.type == PERF_RECORD_SWITCH)
             err = arm_spe_context_switch(spe, event, sample);
     }
 
@@ -807,7 +850,20 @@ static int arm_spe_flush(struct perf_session *session __maybe_unused,
         return arm_spe_process_timeless_queues(spe, -1,
                 MAX_TIMESTAMP - 1);
 
-    return arm_spe_process_queues(spe, MAX_TIMESTAMP);
+    ret = arm_spe_process_queues(spe, MAX_TIMESTAMP);
+
+    if (spe->warn_context_pkt_namesapce)
+        ui__warning(
+            "Arm SPE CONTEXT packets used for PID/TID tracing.\n\n"
+            "PID values correspond to the root PID namespace.\n\n");
+
+    if (spe->warn_context_switch_ev_accuracy)
+        ui__warning(
+            "No Arm SPE CONTEXT packets found within traces.\n\n"
+            "Fallback to PERF_RECORD_SWITCH events for PID/TID tracing will have\n"
+            "workload-dependant timing inaccuracies.\n\n");
+
+    return ret;
 }
 
 static void arm_spe_free_queue(void *priv)
@@ -1083,6 +1139,10 @@ int arm_spe_process_auxtrace_info(union perf_event *event,
 
     spe->timeless_decoding = arm_spe__is_timeless_decoding(spe);
 
+    spe->exclude_kernel = arm_spe__is_exclude_kernel(spe);
+    spe->warn_context_pkt_namesapce = false;
+    spe->warn_context_switch_ev_accuracy = false;
+
     /*
      * The synthesized event PERF_RECORD_TIME_CONV has been handled ahead
      * and the parameters for hardware clock are stored in the session
--
2.17.1