Re: [PATCH v12 2/5] soc: qcom: Add Sleep stats driver

From: Maulik Shah
Date: Mon Oct 18 2021 - 10:16:12 EST


Hi Shawn,

On 10/15/2021 7:28 PM, Shawn Guo wrote:
Hi Mahesh,

Thanks for the work!

While I tested it good on SDM660 and MSM8939, I have a question
regarding 'vlow' mode below.

On Wed, Oct 13, 2021 at 12:08:21PM +0530, Maulik Shah wrote:
From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>

Let's add a driver to read the stats from remote processor and
export to debugfs.

The driver creates "qcom_sleep_stats" directory in debugfs and
adds files for various low power mode available. Below is sample
output with command

cat /sys/kernel/debug/qcom_sleep_stats/ddr
count = 0
Last Entered At = 0
Last Exited At = 0
Accumulated Duration = 0

Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
[mkshah: add subsystem sleep stats, create one file for each stat]
Signed-off-by: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
---
drivers/soc/qcom/Kconfig | 10 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_stats.c | 277 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 288 insertions(+)
create mode 100644 drivers/soc/qcom/qcom_stats.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index abfef20..3cf3a6b 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -199,6 +199,16 @@ config QCOM_SPM
to manage cores, L2 low power modes and to configure the internal
Adaptive Voltage Scaler parameters, where supported.
+config QCOM_STATS
+ tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver"
+ depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST
+ depends on QCOM_SMEM
+ help
+ Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read
+ the shared memory exported by the remote processor related to
+ various SoC level low power modes statistics and export to debugfs
+ interface.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 24514c7..70d5de6 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_SPM) += spm.o
+obj-$(CONFIG_QCOM_STATS) += qcom_stats.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
diff --git a/drivers/soc/qcom/qcom_stats.c b/drivers/soc/qcom/qcom_stats.c
new file mode 100644
index 0000000..817505b
--- /dev/null
+++ b/drivers/soc/qcom/qcom_stats.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/soc/qcom/smem.h>
+#include <clocksource/arm_arch_timer.h>
+
+#define RPM_DYNAMIC_ADDR 0x14
+#define RPM_DYNAMIC_ADDR_MASK 0xFFFF
+
+#define STAT_TYPE_OFFSET 0x0
+#define COUNT_OFFSET 0x4
+#define LAST_ENTERED_AT_OFFSET 0x8
+#define LAST_EXITED_AT_OFFSET 0x10
+#define ACCUMULATED_OFFSET 0x18
+#define CLIENT_VOTES_OFFSET 0x1c
+
+struct subsystem_data {
+ const char *name;
+ u32 smem_item;
+ u32 pid;
+};
+
+static const struct subsystem_data subsystems[] = {
+ { "modem", 605, 1 },
+ { "wpss", 605, 13 },
+ { "adsp", 606, 2 },
+ { "cdsp", 607, 5 },
+ { "slpi", 608, 3 },
+ { "gpu", 609, 0 },
+ { "display", 610, 0 },
+ { "adsp_island", 613, 2 },
+ { "slpi_island", 613, 3 },
+};
+
+struct stats_config {
+ size_t stats_offset;
+ size_t num_records;
+ bool appended_stats_avail;
+ bool dynamic_offset;
+ bool subsystem_stats_in_smem;
+};
+
+struct stats_data {
+ bool appended_stats_avail;
+ void __iomem *base;
+};
+
+struct sleep_stats {
+ u32 stat_type;
+ u32 count;
+ u64 last_entered_at;
+ u64 last_exited_at;
+ u64 accumulated;
+};
+
+struct appended_stats {
+ u32 client_votes;
+ u32 reserved[3];
+};
+
+static void qcom_print_stats(struct seq_file *s, const struct sleep_stats *stat)
+{
+ u64 accumulated = stat->accumulated;
+ /*
+ * If a subsystem is in sleep when reading the sleep stats adjust
+ * the accumulated sleep duration to show actual sleep time.
+ */
+ if (stat->last_entered_at > stat->last_exited_at)
+ accumulated += arch_timer_read_counter() - stat->last_entered_at;
+
+ seq_printf(s, "Count: %u\n", stat->count);
+ seq_printf(s, "Last Entered At: %llu\n", stat->last_entered_at);
+ seq_printf(s, "Last Exited At: %llu\n", stat->last_exited_at);
+ seq_printf(s, "Accumulated Duration: %llu\n", accumulated);
+}
+
+static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused)
+{
+ struct subsystem_data *subsystem = s->private;
+ struct sleep_stats *stat;
+
+ /* Items are allocated lazily, so lookup pointer each time */
+ stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
+ if (IS_ERR(stat))
+ return -EIO;
+
+ qcom_print_stats(s, stat);
+
+ return 0;
+}
+
+static int qcom_soc_sleep_stats_show(struct seq_file *s, void *unused)
+{
+ struct stats_data *d = s->private;
+ void __iomem *reg = d->base;
+ struct sleep_stats stat;
+
+ memcpy_fromio(&stat, reg, sizeof(stat));
+ qcom_print_stats(s, &stat);
+
+ if (d->appended_stats_avail) {
+ struct appended_stats votes;
+
+ memcpy_fromio(&votes, reg + CLIENT_VOTES_OFFSET, sizeof(votes));
+ seq_printf(s, "Client Votes: %#x\n", votes.client_votes);
+ }
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(qcom_soc_sleep_stats);
+DEFINE_SHOW_ATTRIBUTE(qcom_subsystem_sleep_stats);
+
+static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *reg,
+ struct stats_data *d,
+ const struct stats_config *config)
+{
+ char stat_type[sizeof(u32) + 1] = {0};
+ size_t stats_offset = config->stats_offset;
+ u32 offset = 0, type;
+ int i, j;
+
+ /*
+ * On RPM targets, stats offset location is dynamic and changes from target
+ * to target and sometimes from build to build for same target.
+ *
+ * In such cases the dynamic address is present at 0x14 offset from base
+ * address in devicetree. The last 16bits indicates the stats_offset.
+ */
+ if (config->dynamic_offset) {
+ stats_offset = readl(reg + RPM_DYNAMIC_ADDR);
+ stats_offset &= RPM_DYNAMIC_ADDR_MASK;
+ }
+
+ for (i = 0; i < config->num_records; i++) {
+ d[i].base = reg + offset + stats_offset;
+
+ /*
+ * Read the low power mode name and create debugfs file for it.
+ * The names read could be of below,
+ * (may change depending on low power mode supported).
+ * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
+ * For rpm-sleep-stats: "vmin" and "vlow".

It reports 'vmin' and 'xosd' on MSM8939, 'vmin' and 'vlow' on SDM660.
I know that 'vmin' is VDD Minimization mode, and 'xosd' is XO Shutdown
mode. But I'm not sure about 'vlow' mode. Could you share some
information regarding what this low power mode is, and how it differs
from 'vmin' and 'xosd'?

vlow and xosd are same.
vmin is xosd plus voltage minimization of chip, memory rails.

Thanks,
Maulik


Also I guess XO Shutdown mode is still available on SoCs that report
'vlow' instead of 'xosd', just like SDM660. Is there any way we can
still check the stats of XO Shutdown mode on these SoCs? Thanks!

Shawn

+ */
+ type = readl(d[i].base);
+ for (j = 0; j < sizeof(u32); j++) {
+ stat_type[j] = type & 0xff;
+ type = type >> 8;
+ }
+ strim(stat_type);
+ debugfs_create_file(stat_type, 0400, root, &d[i],
+ &qcom_soc_sleep_stats_fops);
+
+ offset += sizeof(struct sleep_stats);
+ if (d[i].appended_stats_avail)
+ offset += sizeof(struct appended_stats);
+ }
+}
+
+static void qcom_create_subsystem_stat_files(struct dentry *root,
+ const struct stats_config *config)
+{
+ const struct sleep_stats *stat;
+ int i;
+
+ if (!config->subsystem_stats_in_smem)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
+ stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item, NULL);
+ if (IS_ERR(stat))
+ continue;
+
+ debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i],
+ &qcom_subsystem_sleep_stats_fops);
+ }
+}
+
+static int qcom_stats_probe(struct platform_device *pdev)
+{
+ void __iomem *reg;
+ struct dentry *root;
+ const struct stats_config *config;
+ struct stats_data *d;
+ int i;
+
+ config = device_get_match_data(&pdev->dev);
+ if (!config)
+ return -ENODEV;
+
+ reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(reg))
+ return -ENOMEM;
+
+ d = devm_kcalloc(&pdev->dev, config->num_records,
+ sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ for (i = 0; i < config->num_records; i++)
+ d[i].appended_stats_avail = config->appended_stats_avail;
+
+ root = debugfs_create_dir("qcom_stats", NULL);
+
+ qcom_create_subsystem_stat_files(root, config);
+ qcom_create_soc_sleep_stat_files(root, reg, d, config);
+
+ platform_set_drvdata(pdev, root);
+
+ return 0;
+}
+
+static int qcom_stats_remove(struct platform_device *pdev)
+{
+ struct dentry *root = platform_get_drvdata(pdev);
+
+ debugfs_remove_recursive(root);
+
+ return 0;
+}
+
+static const struct stats_config rpm_data = {
+ .stats_offset = 0,
+ .num_records = 2,
+ .appended_stats_avail = true,
+ .dynamic_offset = true,
+ .subsystem_stats_in_smem = false,
+};
+
+static const struct stats_config rpmh_data = {
+ .stats_offset = 0x48,
+ .num_records = 3,
+ .appended_stats_avail = false,
+ .dynamic_offset = false,
+ .subsystem_stats_in_smem = true,
+};
+
+static const struct of_device_id qcom_stats_table[] = {
+ { .compatible = "qcom,rpm-stats", .data = &rpm_data },
+ { .compatible = "qcom,rpmh-stats", .data = &rpmh_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_stats_table);
+
+static struct platform_driver qcom_stats = {
+ .probe = qcom_stats_probe,
+ .remove = qcom_stats_remove,
+ .driver = {
+ .name = "qcom_stats",
+ .of_match_table = qcom_stats_table,
+ },
+};
+
+static int __init qcom_stats_init(void)
+{
+ return platform_driver_register(&qcom_stats);
+}
+late_initcall(qcom_stats_init);
+
+static void __exit qcom_stats_exit(void)
+{
+ platform_driver_unregister(&qcom_stats);
+}
+module_exit(qcom_stats_exit)
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) Stats driver");
+MODULE_LICENSE("GPL v2");
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation