[PATCH net-next 0/4] New RGMII delay DT bindings for the SJA1105 DSA driver

[Vladimir Oltean]

During recent reviews I've been telling people that new MAC drivers
should adopt a certain DT binding format for RGMII delays in order to
avoid conflicting interpretations. Some suggestions were better received
than others, and it appears we are still far from a consensus.

Part of the problem seems to be that there are still drivers that apply
RGMII delays based on an incorrect interpretation of the device tree,
and these serve as a bad example for others.
I happen to maintain one of those drivers and I am able to test it, so I
figure that one of the ways in which I can make a change is to stop
providing a bad example.

Therefore, this series adds support for the "rx-internal-delay-ps" and
"tx-internal-delay-ps" properties inside sja1105 switch port DT nodes,
and if these are present, they will decide what RGMII delays will the
driver apply.

The in-tree device trees are also updated to follow the new format, as
well as the schema validator.

Changes in v2:
- removed devicetree patches, to be sent via Shawn Guo's tree
- fixed yamllint indentation warnings

Vladimir Oltean (4):
  dt-bindings: net: dsa: sja1105: fix example so all ports have a
    phy-handle of fixed-link
  dt-bindings: net: dsa: inherit the ethernet-controller DT schema
  dt-bindings: net: dsa: sja1105: add {rx,tx}-internal-delay-ps
  net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for
    RGMII delays

 .../devicetree/bindings/net/dsa/dsa.yaml      |  7 ++
 .../bindings/net/dsa/nxp,sja1105.yaml         | 43 +++++++++
 drivers/net/dsa/sja1105/sja1105.h             | 25 ++++-
 drivers/net/dsa/sja1105/sja1105_clocking.c    | 35 +++----
 drivers/net/dsa/sja1105/sja1105_main.c        | 94 ++++++++++++++-----
 5 files changed, 157 insertions(+), 47 deletions(-)

-- 
2.25.1