[PATCH v14 00/11] Add support for Hikey 970 PCIe

[Mauro Carvalho Chehab]

Hi Lorenzo,

I addressed the issues you pointed on this review.

The pcie-kirin PCIe driver contains internally a PHY interface for
Kirin 960, but it misses support for Kirin 970. A new PHY driver
for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c
(already merged via PHY tree).

Add support for Kirin 970 PHY driver at the pcie-kirin.c.

While here, also add the needed logic to compile it as module and
to allow to dynamically remove the driver in runtime.

Tested on HiKey970:

  # lspci -D -PP
  0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
  0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809
  0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)

Tested on HiKey960:

  # lspci -D 
  0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)

---

Diff from v13:

@@ -455,7 +455,7 @@ static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
                                    struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
-       struct device_node *node = dev->of_node, *child;
+       struct device_node *child, *node = dev->of_node;
        void __iomem *apb_base;
        int ret;
 
@@ -687,9 +687,8 @@ static int kirin_pcie_power_off(struct kirin_pcie *kirin_pcie)
        if (kirin_pcie->type == PCIE_KIRIN_INTERNAL_PHY)
                return hi3660_pcie_phy_power_off(kirin_pcie);
 
-       for (i = 0; i < kirin_pcie->n_gpio_clkreq; i++) {
+       for (i = 0; i < kirin_pcie->n_gpio_clkreq; i++)
                gpio_direction_output(kirin_pcie->gpio_id_clkreq[i], 1);
-       }
 
        phy_power_off(kirin_pcie->phy);
        phy_exit(kirin_pcie->phy);
@@ -790,7 +789,7 @@ static int kirin_pcie_probe(struct platform_device *pdev)
                return -EINVAL;
        }
 
-       phy_type = (enum pcie_kirin_phy_type)of_id->data;
+       phy_type = (long)of_id->data;
 
        kirin_pcie = devm_kzalloc(dev, sizeof(struct kirin_pcie), GFP_KERNEL);
        if (!kirin_pcie)

v14:
  - Split a timeout logic from patch 4, placing it on a separate patch;
  - Added fixes: and cc: tags to the power_off fixup patch;
  - change a typecast from of_data to long, in order to avoid a warning on
   some randconfigs;
  - removed uneeded brackets at the power_off patch;
  - reordered struct device pointers at kirin_pcie_get_resource();
  - added a c/c to kishon at the PHY-related patches.

v13:
  - Added Xiaowei's ack for the series.

v12:
  - Change a comment at patch 1 to not use c99 style.

v11:
  - patch 5 changed to use the right PCIe topology
  - all other patches are identical to v10.

v10:
  - patch 1: dropped magic numbers from PHY driver
  - patch 5: allow pcie child nodes without reset-gpios
  - all other patches are identical to v9.

v9:
  - Did some cleanups at patches 1 and 5

Mauro Carvalho Chehab (11):
  PCI: kirin: Reorganize the PHY logic inside the driver
  PCI: kirin: Add support for a PHY layer
  PCI: kirin: Use regmap for APB registers
  PCI: kirin: Add support for bridge slot DT schema
  PCI: kirin: give more time for PERST# reset to finish
  PCI: kirin: Add Kirin 970 compatible
  PCI: kirin: Add MODULE_* macros
  PCI: kirin: Allow building it as a module
  PCI: kirin: Add power_off support for Kirin 960 PHY
  PCI: kirin: fix poweroff sequence
  PCI: kirin: Allow removing the driver

 drivers/pci/controller/dwc/Kconfig      |   2 +-
 drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------
 2 files changed, 497 insertions(+), 148 deletions(-)

-- 
2.31.1