Re: [PATCH v11 1/4] HID: wacom_sys: Add support for flipping the data values

[Alistair Francis]

On Tue, Oct 19, 2021 at 11:51 AM Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
>
> Hi Ping,
>
> On Mon, Oct 18, 2021 at 10:41:55AM -0700, Ping Cheng wrote:
> > Hi Alistair,
> >
> > On Sat, Oct 9, 2021, 4:44 AM Alistair Francis <alistair@xxxxxxxxxxxxx>
> > wrote:
> >
> > > Add support to the Wacom HID device for flipping the values based on
> > > device tree settings. This allows us to support devices where the panel
> > > is installed in a different orientation, such as the reMarkable2.
> > >
> >
> > This device was designed for hid-generic driver, if it's not driven by
> > wacom_i2c.c or an out of tree driver.
> >
> > wacom.ko doesn't support vid 0x2d1f devices.
>
> I am really confused about this distinction. Could you please elaborate
> why wacom driver only supports 0x056a (and, curiously, some Lenovo)
> devices.
>
> Thanks.
>
>
> >
> > Nacked-by: Ping Cheng <Ping.Cheng@xxxxxxxxx>
> >
> > Sorry about that,
> > Ping
> >
> > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> > > ---
> > >  .../bindings/input/hid-over-i2c.txt           | 20 ++++++
> > >  drivers/hid/wacom_sys.c                       | 25 ++++++++
> > >  drivers/hid/wacom_wac.c                       | 61 +++++++++++++++++++
> > >  drivers/hid/wacom_wac.h                       | 13 ++++
> > >  4 files changed, 119 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> > > b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> > > index c76bafaf98d2..16ebd7c46049 100644
> > > --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> > > +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> > > @@ -33,6 +33,26 @@ device-specific compatible properties, which should be
> > > used in addition to the
> > >  - post-power-on-delay-ms: time required by the device after enabling its
> > > regulators
> > >    or powering it on, before it is ready for communication.
> > >
> > > +  flip-tilt-x:
> > > +    type: boolean
> > > +    description: Flip the tilt X values read from device
> > > +
> > > +  flip-tilt-y:
> > > +    type: boolean
> > > +    description: Flip the tilt Y values read from device
>
> Do these really need to be controlled separately from the main
> touchcsreen orientation?

I don't think so actually.

>
> > > +
> > > +  flip-pos-x:
> > > +    type: boolean
> > > +    description: Flip the X position values read from device
> > > +
> > > +  flip-pos-y:
> > > +    type: boolean
> > > +    description: Flip the Y position values read from device
>
> We already have touchscreen-inverted-x/y defined in
> Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml,
> why are they not sufficient?

The touchscreen-* properties aren't applied to HID devices though, at
least not that I can tell.

Alistair

>
> > > +
> > > +  flip-distance:
> > > +    type: boolean
> > > +    description: Flip the distance values read from device
>
> I am still confused of the notion of flipped distance.
>
> > > +
> > >  Example:
> > >
> > >         i2c-hid-dev@2c {
> > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> > > index 93f49b766376..47d9590b10bd 100644
> > > --- a/drivers/hid/wacom_sys.c
> > > +++ b/drivers/hid/wacom_sys.c
> > > @@ -10,6 +10,7 @@
> > >
> > >  #include "wacom_wac.h"
> > >  #include "wacom.h"
> > > +#include <linux/of.h>
> > >  #include <linux/input/mt.h>
> > >
> > >  #define WAC_MSG_RETRIES                5
> > > @@ -2730,6 +2731,28 @@ static void wacom_mode_change_work(struct
> > > work_struct *work)
> > >         return;
> > >  }
> > >
> > > +static void wacom_of_read(struct hid_device *hdev, struct wacom_wac
> > > *wacom_wac)
> > > +{
> > > +       if (IS_ENABLED(CONFIG_OF)) {
> > > +               wacom_wac->flip_tilt_x =
> > > of_property_read_bool(hdev->dev.parent->of_node,
> > > +                                                       "flip-tilt-x");
> > > +               wacom_wac->flip_tilt_y =
> > > of_property_read_bool(hdev->dev.parent->of_node,
> > > +                                                       "flip-tilt-y");
> > > +               wacom_wac->flip_pos_x =
> > > of_property_read_bool(hdev->dev.parent->of_node,
> > > +                                                       "flip-pos-x");
> > > +               wacom_wac->flip_pos_y =
> > > of_property_read_bool(hdev->dev.parent->of_node,
> > > +                                                       "flip-pos-y");
> > > +               wacom_wac->flip_distance =
> > > of_property_read_bool(hdev->dev.parent->of_node,
> > > +                                                       "flip-distance");
> > > +       } else {
> > > +               wacom_wac->flip_tilt_x = false;
> > > +               wacom_wac->flip_tilt_y = false;
> > > +               wacom_wac->flip_pos_x = false;
> > > +               wacom_wac->flip_pos_y = false;
> > > +               wacom_wac->flip_distance = false;
> > > +       }
> > > +}
> > > +
> > >  static int wacom_probe(struct hid_device *hdev,
> > >                 const struct hid_device_id *id)
> > >  {
> > > @@ -2797,6 +2820,8 @@ static int wacom_probe(struct hid_device *hdev,
> > >                                  error);
> > >         }
> > >
> > > +       wacom_of_read(hdev, wacom_wac);
> > > +
> > >         wacom_wac->probe_complete = true;
> > >         return 0;
> > >  }
> > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
> > > index 33a6908995b1..c01f683e23fa 100644
> > > --- a/drivers/hid/wacom_wac.c
> > > +++ b/drivers/hid/wacom_wac.c
> > > @@ -3261,6 +3261,63 @@ static int wacom_status_irq(struct wacom_wac
> > > *wacom_wac, size_t len)
> > >         return 0;
> > >  }
> > >
> > > +static int wacom_of_irq(struct wacom_wac *wacom_wac, size_t len)
> > > +{
> > > +       const struct wacom_features *features = &wacom_wac->features;
> > > +       unsigned char *data = wacom_wac->data;
> > > +       struct input_dev *input = wacom_wac->pen_input;
> > > +       unsigned int x, y, pressure;
> > > +       unsigned char tsw, f1, f2, ers;
> > > +       short tilt_x, tilt_y, distance;
> > > +
> > > +       if (!IS_ENABLED(CONFIG_OF))
> > > +               return 0;
> > > +
> > > +       tsw = data[1] & WACOM_TIP_SWITCH_bm;
> > > +       ers = data[1] & WACOM_ERASER_bm;
> > > +       f1 = data[1] & WACOM_BARREL_SWITCH_bm;
> > > +       f2 = data[1] & WACOM_BARREL_SWITCH_2_bm;
> > > +       x = le16_to_cpup((__le16 *)&data[2]);
> > > +       y = le16_to_cpup((__le16 *)&data[4]);
> > > +       pressure = le16_to_cpup((__le16 *)&data[6]);
> > > +
> > > +       /* Signed */
> > > +       tilt_x = get_unaligned_le16(&data[9]);
> > > +       tilt_y = get_unaligned_le16(&data[11]);
> > > +
> > > +       distance = get_unaligned_le16(&data[13]);
>
> You are still parsing raw data. The point of HID is to provide common
> framework for scaling raw values.
>
> Thanks.
>
> --
> Dmitry