Re: [PATCH v1] usb: xhci: tegra: Check padctrl interrupt presence in device tree

[Dmitry Osipenko]

21.10.2021 18:20, Alan Stern пишет:
> On Thu, Oct 21, 2021 at 06:08:41PM +0300, Dmitry Osipenko wrote:
>> 21.10.2021 17:57, Dmitry Osipenko пишет:
>>> It might be wrong to disable device_may_wakeup() because it will change
>>> the system suspend-resume behaviour, i.e. you won't be able to resume by
>>> USB event, see [1].
>>>
>>> [1]
>>> https://elixir.bootlin.com/linux/v5.15-rc6/source/drivers/usb/host/xhci-tegra.c#L1962
>>>
>>> Although, I'm not sure whether this is a correct behaviour to start
>>> with. Previously, before the offending commit, device_wakeup was never
>>> enabled for tegra-xusb. Commit message doesn't explain why wakeup is now
>>> enabled unconditionally, wakeup checks aren't needed at all then. This
>>> makes no sense, please check it with JC Kuo.
>>
>> Although, wakeup could be disabled via sysfs, so it makes sense. Still
>> it's not clear whether it's a correct behaviour to enable wakeup during
>> system suspend by default. If it wakes machine from suspend when USB
>> device is plugged/unplugged, then it's a wrong behaviour.
> 
> It depends on the details of how the device works.  In most cases we do 
> want to enable wakeup by default for host controller devices.  The 
> reason is simple enough: If some USB device attached to the HC is 
> enabled for wakeup and sends a wakeup request, we don't want the request 
> to get lost because the HC isn't allowed to forward the request on to 
> the CPU.
> 
> But we do not want to enable wakeup for root hubs.  In particular, we 
> don't want to wake up a suspended system merely because a USB device has 
> been plugged or unplugged.
> 
> Clearly this arrangement depends on the hardware making a distinction 
> between wakeup requests originating from the root hub and those simply 
> passing through the HC.

Should USB keyboard be able to wake up every HC or it's a
machine-specific feature? I'm asking because wakeup works on a typical
Intel hardware, but doesn't work on older Tegra SoCs that use Chipidea
controller. It's not obvious to me whether this is something that
firmware handles for Intel or it's broken on Tegra. Could you please
clarify? If it should work for every HC, then I may try to take a closer
look.