[PATCH net-next 3/3] net: bcmgenet: Add support for 7712 16nm internal EPHY
From: Florian Fainelli
Date: Fri Oct 22 2021 - 12:17:18 EST
The 16nm internal EPHY that is present in 7712 is actually a 16nm
Gigabit PHY which has been forced to operate in 10/100 mode. Its
controls are therefore via the EXT_GPHY_CTRL registers and not via the
EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on
the 7712 compatible string to allow that differentiation to happen.
On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by
default, but this is not the case with this chip, so we need to make
sure we clear it to power on the EPHY.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 +++++++++++--
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 ++
drivers/net/ethernet/broadcom/genet/bcmmii.c | 7 ++++---
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 5da9c00b43b1..226f4403cfed 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1653,7 +1653,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
/* Power down LED */
if (priv->hw_params->flags & GENET_HAS_EXT) {
reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- if (GENET_IS_V5(priv))
+ if (GENET_IS_V5(priv) && !priv->ephy_16nm)
reg |= EXT_PWR_DOWN_PHY_EN |
EXT_PWR_DOWN_PHY_RD |
EXT_PWR_DOWN_PHY_SD |
@@ -1690,7 +1690,7 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv,
case GENET_POWER_PASSIVE:
reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
EXT_ENERGY_DET_MASK);
- if (GENET_IS_V5(priv)) {
+ if (GENET_IS_V5(priv) && !priv->ephy_16nm) {
reg &= ~(EXT_PWR_DOWN_PHY_EN |
EXT_PWR_DOWN_PHY_RD |
EXT_PWR_DOWN_PHY_SD |
@@ -3910,6 +3910,7 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
struct bcmgenet_plat_data {
enum bcmgenet_version version;
u32 dma_max_burst_length;
+ bool ephy_16nm;
};
static const struct bcmgenet_plat_data v1_plat_data = {
@@ -3942,6 +3943,12 @@ static const struct bcmgenet_plat_data bcm2711_plat_data = {
.dma_max_burst_length = 0x08,
};
+static const struct bcmgenet_plat_data bcm7712_plat_data = {
+ .version = GENET_V5,
+ .dma_max_burst_length = DMA_MAX_BURST_LENGTH,
+ .ephy_16nm = true,
+};
+
static const struct of_device_id bcmgenet_match[] = {
{ .compatible = "brcm,genet-v1", .data = &v1_plat_data },
{ .compatible = "brcm,genet-v2", .data = &v2_plat_data },
@@ -3949,6 +3956,7 @@ static const struct of_device_id bcmgenet_match[] = {
{ .compatible = "brcm,genet-v4", .data = &v4_plat_data },
{ .compatible = "brcm,genet-v5", .data = &v5_plat_data },
{ .compatible = "brcm,bcm2711-genet-v5", .data = &bcm2711_plat_data },
+ { .compatible = "brcm,bcm7712-genet-v5", .data = &bcm7712_plat_data },
{ },
};
MODULE_DEVICE_TABLE(of, bcmgenet_match);
@@ -4029,6 +4037,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
if (pdata) {
priv->version = pdata->version;
priv->dma_max_burst_length = pdata->dma_max_burst_length;
+ priv->ephy_16nm = pdata->ephy_16nm;
} else {
priv->version = pd->genet_version;
priv->dma_max_burst_length = DMA_MAX_BURST_LENGTH;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 1cc2838e52c6..946f6e283c4e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -329,6 +329,7 @@ struct bcmgenet_mib_counters {
#define EXT_CFG_IDDQ_BIAS (1 << 0)
#define EXT_CFG_PWR_DOWN (1 << 1)
#define EXT_CK25_DIS (1 << 4)
+#define EXT_CFG_IDDQ_GLOBAL_PWR (1 << 3)
#define EXT_GPHY_RESET (1 << 5)
/* DMA rings size */
@@ -612,6 +613,7 @@ struct bcmgenet_priv {
phy_interface_t phy_interface;
int phy_addr;
int ext_phy;
+ bool ephy_16nm;
/* Interrupt variables */
struct work_struct bcmgenet_irq_work;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index ad56f54eda0a..5f259641437a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -139,14 +139,15 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
u32 reg = 0;
/* EXT_GPHY_CTRL is only valid for GENETv4 and onward */
- if (GENET_IS_V4(priv)) {
+ if (GENET_IS_V4(priv) || priv->ephy_16nm) {
reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
if (enable) {
reg &= ~EXT_CK25_DIS;
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
mdelay(1);
- reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN);
+ reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN |
+ EXT_CFG_IDDQ_GLOBAL_PWR);
reg |= EXT_GPHY_RESET;
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
mdelay(1);
@@ -154,7 +155,7 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
reg &= ~EXT_GPHY_RESET;
} else {
reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN |
- EXT_GPHY_RESET;
+ EXT_GPHY_RESET | EXT_CFG_IDDQ_GLOBAL_PWR;
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
mdelay(1);
reg |= EXT_CK25_DIS;
--
2.25.1