[PATCH v7 0/14] net: phy: Add qca8081 ethernet phy driver

[Luo Jie]

This patch series add the qca8081 ethernet phy driver support, which
improve the wol feature, leverage at803x phy driver and add the fast
retrain, master/slave seed and CDT feature.

Changes in v7:
	* update Reviewed-by tags.

Changes in v6:
	* add Reviewed-by tags on the applicable patches.

Changes in v5:
	* rebase the patches on net-next/master.

Changes in v4:
	* handle other interrupts in set_wol.
	* add genphy_c45_fast_retrain.

Changes in v3:
	* correct a typo "excpet".
	* remove the suffix "PHY" from phy name.

Changes in v2:
	* add definitions of fast retrain related registers in mdio.h.
	* break up the patch into small patches.
	* improve the at803x legacy code.

Changes in v1:
	* merge qca8081 phy driver into at803x.
	* add cdt feature.
	* leverage at803x phy driver helpers.

Luo Jie (14):
  net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  net: phy: at803x: use phy_modify()
  net: phy: at803x: improve the WOL feature
  net: phy: at803x: use GENMASK() for speed status
  net: phy: add qca8081 ethernet phy driver
  net: phy: add qca8081 read_status
  net: phy: add qca8081 get_features
  net: phy: add qca8081 config_aneg
  net: phy: add constants for fast retrain related register
  net: phy: add genphy_c45_fast_retrain
  net: phy: add qca8081 config_init
  net: phy: add qca8081 soft_reset and enable master/slave seed
  net: phy: adjust qca8081 master/slave seed value if link down
  net: phy: add qca8081 cdt feature

 drivers/net/phy/at803x.c  | 580 +++++++++++++++++++++++++++++++++++---
 drivers/net/phy/phy-c45.c |  34 +++
 include/linux/phy.h       |   1 +
 include/uapi/linux/mdio.h |   9 +
 4 files changed, 577 insertions(+), 47 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project