Re: [PATCH v2] perf vendor events power10: Add metric events json file for power10 platform

From: kajoljain
Date: Tue Oct 26 2021 - 06:01:46 EST

Next message: Borislav Petkov: "Re: [PATCH v2 2/5] x86/mce/inject: Warn the user on a not set valid bit in MCA_STATUS"
Previous message: Jiamei Xie: "RE: [PATCH v2] xen: Fix implicit type conversion"
In reply to: Paul A. Clarke: "Re: [PATCH v2] perf vendor events power10: Add metric events json file for power10 platform"
Next in thread: kajoljain: "Re: [PATCH v2] perf vendor events power10: Add metric events json file for power10 platform"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 10/25/21 5:36 PM, Paul A. Clarke wrote:
> On Mon, Oct 25, 2021 at 02:23:15PM +1100, Michael Ellerman wrote:
>> "Paul A. Clarke" <pc@xxxxxxxxxx> writes:
>>> Thanks for the changes!
>>> More nits below (many left over from prior review)...
>>>
>>> On Fri, Oct 22, 2021 at 11:55:05AM +0530, Kajol Jain wrote:
>>>> Add pmu metric json file for power10 platform.
>>>>
>>>> Signed-off-by: Kajol Jain <kjain@xxxxxxxxxxxxx>
>>>> ---
>>>> Changelog v1 -> v2:
>>>> - Did some nit changes in BriefDescription field
>>>> as suggested by Paul A. Clarke
>>>>
>>>> - Link to the v1 patch: https://lkml.org/lkml/2021/10/6/131
>>>>
>>>> .../arch/powerpc/power10/metrics.json | 676 ++++++++++++++++++
>>>> 1 file changed, 676 insertions(+)
>>>> create mode 100644 tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>>>>
>>>> diff --git a/tools/perf/pmu-events/arch/powerpc/power10/metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>>>> new file mode 100644
>>>> index 000000000000..8adab5cd9934
>>>> --- /dev/null
>>>> +++ b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>>>> @@ -0,0 +1,676 @@
>>>> +[
>>>> + {
>>>> + "BriefDescription": "Percentage of cycles that are run cycles",
>>>> + "MetricExpr": "PM_RUN_CYC / PM_CYC * 100",
>>>> + "MetricGroup": "General",
>>>> + "MetricName": "RUN_CYCLES_RATE",
>>>> + "ScaleUnit": "1%"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per completed instruction",
>>>> + "MetricExpr": "PM_CYC / PM_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "CYCLES_PER_INSTRUCTION"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled for any reason",
>>>> + "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because there was a flush",
>>>> + "MetricExpr": "PM_DISP_STALL_FLUSH / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_FLUSH_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because the MMU was handling a translation miss",
>>>> + "MetricExpr": "PM_DISP_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_TRANSLATION_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled waiting to resolve an instruction ERAT miss",
>>>> + "MetricExpr": "PM_DISP_STALL_IERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_IERAT_ONLY_MISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled waiting to resolve an instruction TLB miss",
>>>> + "MetricExpr": "PM_DISP_STALL_ITLB_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_ITLB_MISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to an icache miss",
>>>> + "MetricExpr": "PM_DISP_STALL_IC_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_IC_MISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from the local L2",
>>>> + "MetricExpr": "PM_DISP_STALL_IC_L2 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_IC_L2_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from the local L3",
>>>> + "MetricExpr": "PM_DISP_STALL_IC_L3 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_IC_L3_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from any source beyond the local L3",
>>>> + "MetricExpr": "PM_DISP_STALL_IC_L3MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_IC_L3MISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to an icache miss after a branch mispredict",
>>>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_ICMISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_BR_MPRED_ICMISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from the local L2 after suffering a branch mispredict",
>>>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L2 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L2_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from the local L3 after suffering a branch mispredict",
>>>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from any source beyond the local L3 after suffering a branch mispredict",
>>>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3MISS_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to a branch mispredict",
>>>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_BR_MPRED_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch for any reason",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because of a synchronizing instruction that requires the ICT to be empty before dispatch",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_SYNC_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISP_HELD_STALL_SYNC_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch while waiting on the scoreboard",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_SCOREBOARD_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISP_HELD_STALL_SCOREBOARD_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch due to issue queue full",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISP_HELD_STALL_ISSQ_FULL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the mapper/SRB was full",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_RENAME_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_RENAME_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the STF mapper/SRB was full",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_STF_MAPPER_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_STF_MAPPER_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the XVFC mapper/SRB was full",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_XVFC_MAPPER_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch for any other reason",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_OTHER_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_OTHER_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction has been dispatched but not issued for any reason",
>>>> + "MetricExpr": "PM_ISSUE_STALL / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "ISSUE_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting to be finished in one of the execution units",
>>>> + "MetricExpr": "PM_EXEC_STALL / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "EXECUTION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction spent executing an NTC instruction that gets flushed some time after dispatch",
>>>> + "MetricExpr": "PM_EXEC_STALL_NTC_FLUSH / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "NTC_FLUSH_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTF instruction finishes at dispatch",
>>>> + "MetricExpr": "PM_EXEC_STALL_FIN_AT_DISP / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "FIN_AT_DISP_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the branch unit",
>>>> + "MetricExpr": "PM_EXEC_STALL_BRU / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "BRU_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a simple fixed point instruction that is executing in the LSU",
>>>> + "MetricExpr": "PM_EXEC_STALL_SIMPLE_FX / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "SIMPLE_FX_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the VSU",
>>>> + "MetricExpr": "PM_EXEC_STALL_VSU / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "VSU_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting to be finished in one of the execution units",
>>>> + "MetricExpr": "PM_EXEC_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "TRANSLATION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a load or store that suffered a translation miss",
>>>> + "MetricExpr": "PM_EXEC_STALL_DERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DERAT_ONLY_MISS_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is recovering from a TLB miss",
>>>> + "MetricExpr": "PM_EXEC_STALL_DERAT_DTLB_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DERAT_DTLB_MISS_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the LSU",
>>>> + "MetricExpr": "PM_EXEC_STALL_LSU / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "LSU_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a load that is executing in the LSU",
>>>> + "MetricExpr": "PM_EXEC_STALL_LOAD / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "LOAD_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_L2L3_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, with an RC dispatch conflict",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_L2L3_CONFLICT_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, without an RC dispatch conflict",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_L2L3_NOCONFLICT_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a source beyond the local L2 and local L3",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L3MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_L3MISS_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a neighbor chiplet's L2 or L3 in the same chip",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L21_L31 / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_L21_L31_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from L4, local memory or OpenCapp chip",
>>>
>>> What is "OpenCapp"? Is is different from OpenCAPI?
>>>
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_LMEM / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_LMEM_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a remote chip (cache, L4, memory or OpenCapp) in the same group",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_CHIP / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_OFF_CHIP_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a distant chip (cache, L4, memory or OpenCapp chip)",
>>>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_NODE / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DMISS_OFF_NODE_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing a TLBIEL instruction",
>>>> + "MetricExpr": "PM_EXEC_STALL_TLBIEL / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "TLBIEL_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is finishing a load after its data has been reloaded from a data source beyond the local L1, OR when the LSU is processing an L1-hit, OR when the NTF instruction merged with another load in the LMQ",
>>>> + "MetricExpr": "PM_EXEC_STALL_LOAD_FINISH / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "LOAD_FINISH_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a store that is executing in the LSU",
>>>> + "MetricExpr": "PM_EXEC_STALL_STORE / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "STORE_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is in the store unit outside of handling store misses or other special store operations",
>>>
>>> Is "store unit" not the same as "LSU" ? Use "LSU" uniformly if appropriate:
>>> s/store unit/LSU/
>>>
>>>> + "MetricExpr": "PM_EXEC_STALL_STORE_PIPE / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "STORE_PIPE_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a store whose cache line was not resident in the L1 and had to wait for allocation of the missing line into the L1",
>>>> + "MetricExpr": "PM_EXEC_STALL_STORE_MISS / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "STORE_MISS_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a TLBIE instruction waiting for a response from the L2",
>>>> + "MetricExpr": "PM_EXEC_STALL_TLBIE / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "TLBIE_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing a PTESYNC instruction",
>>>> + "MetricExpr": "PM_EXEC_STALL_PTESYNC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "PTESYNC_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete because the thread was blocked",
>>>> + "MetricExpr": "PM_CMPL_STALL / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete because it was interrupted by ANY exception",
>>>> + "MetricExpr": "PM_CMPL_STALL_EXCEPTION / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "EXCEPTION_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is stuck at finish waiting for the non-speculative finish of either a STCX instruction waiting for its result or a load waiting for non-critical sectors of data and ECC",
>>>> + "MetricExpr": "PM_CMPL_STALL_MEM_ECC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "MEM_ECC_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete the instruction is a STCX instruction waiting for resolution from the nest",
>>>
>>> Need to reword this, I think. I propose "Average cycles per instruction
>>> when the NTC instruction is a STCX instruction waiting for resolution
>>> from the nest", which follows the form used by HWSYNC_COMPLETION_STALL_CPI,
>>> below.
>>>
>>>> + "MetricExpr": "PM_CMPL_STALL_STCX / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "STCX_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a LWSYNC instruction waiting to complete",
>>>> + "MetricExpr": "PM_CMPL_STALL_LWSYNC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "LWSYNC_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a HWSYNC instruction stuck at finish waiting for a response from the L2",
>>>> + "MetricExpr": "PM_CMPL_STALL_HWSYNC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "HWSYNC_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction required special handling before completion",
>>>> + "MetricExpr": "PM_CMPL_STALL_SPECIAL / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "SPECIAL_COMPLETION_STALL_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because fetch was being held, so there was nothing in the pipeline for this thread",
>>>> + "MetricExpr": "PM_DISP_STALL_FETCH / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_FETCH_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because of power management",
>>>> + "MetricExpr": "PM_DISP_STALL_HELD_HALT_CYC / PM_RUN_INST_CMPL",
>>>> + "MetricGroup": "CPI",
>>>> + "MetricName": "DISPATCHED_HELD_HALT_CPI"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Percentage of flushes per completed run instruction",
>>>
>>> s/per completed run instruction/per instruction/
>>
>> I'm not sure we want to drop "completed" from this and all the following
>> descriptions.
>>
>> There is a meaningful distinction between completed and dispatched
>> instructions, I think it's useful to be explicit about which the event
>> is counting.
>>
>> I agree dropping "run" is a good idea, most people won't understand that
>> "run" means "non-idle", and I think don't expect idle instructions to be
>> counted anyway.
>>
>> ...
>>>
>>>> + "MetricExpr": "PM_RUN_INST_CMPL / PM_RUN_CYC",
>>>> + "MetricGroup": "General",
>>>> + "MetricName": "RUN_IPC"
>>>> + },
>>>> + {
>>>> + "BriefDescription": "Average number of instructions completed per instruction group",
>>>
>>> s/completed//
>>
>> And here the meaning is different if you drop "completed".
>
> All fair comments. I am looking for consistency, but correctness trumps.
>
> Regarding consistency, though, there are lots of occurences like:
> | "BriefDescription": "Average cycles per instruction when dispatch was stalled for any reason",
> | "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL",
>
> Can we pick one phrase for all metrics where PM_RUN_INST_CMPL is used,
> perhaps? "completed instructions" ?

Hi Paul/Michael,
Sure I will update description part to use "completed
instructions", whereever PM_RUN_INST_CMPL event is used.

Thanks,
Kajol Jain

>
> PC
>

Next message: Borislav Petkov: "Re: [PATCH v2 2/5] x86/mce/inject: Warn the user on a not set valid bit in MCA_STATUS"
Previous message: Jiamei Xie: "RE: [PATCH v2] xen: Fix implicit type conversion"
In reply to: Paul A. Clarke: "Re: [PATCH v2] perf vendor events power10: Add metric events json file for power10 platform"
Next in thread: kajoljain: "Re: [PATCH v2] perf vendor events power10: Add metric events json file for power10 platform"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]