Re: [PATCH v15 00/13] Add support for Hikey 970 PCIe
From: Lorenzo Pieralisi
Date: Tue Oct 26 2021 - 13:17:37 EST
On Thu, Oct 21, 2021 at 11:45:07AM +0100, Mauro Carvalho Chehab wrote:
> Hi Lorenzo,
>
> I split patch 09/10 from v13 into three patches, in order to have one logical
> change per patch, adding a proper descriptio to each of them. The final
> code didn change.
>
> The pcie-kirin PCIe driver contains internally a PHY interface for
> Kirin 960, but it misses support for Kirin 970. A new PHY driver
> for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c
> (already merged via PHY tree).
>
> Add support for Kirin 970 PHY driver at the pcie-kirin.c.
>
> While here, also add the needed logic to compile it as module and
> to allow to dynamically remove the driver in runtime.
>
> Tested on HiKey970:
>
> # lspci -D -PP
> 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
> 0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809
> 0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
>
> Tested on HiKey960:
>
> # lspci -D
> 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
>
> ---
>
> v15:
> - The power-off fix patch was split into 3, in order to have one logical change
> per patch.
> - Removed Fixes: tag from the poweroff patch;
> - Adjusted capitalization of two patch summary lines
> - No functional changes. The diff of this series is identical to v14.
>
> v14:
> - Split a timeout logic from patch 4, placing it on a separate patch;
> - Added fixes: and cc: tags to the power_off fixup patch;
> - change a typecast from of_data to long, in order to avoid a warning on
> some randconfigs;
> - removed uneeded brackets at the power_off patch;
> - reordered struct device pointers at kirin_pcie_get_resource();
> - added a c/c to kishon at the PHY-related patches.
>
> v13:
> - Added Xiaowei's ack for the series.
>
> v12:
> - Change a comment at patch 1 to not use c99 style.
>
> v11:
> - patch 5 changed to use the right PCIe topology
> - all other patches are identical to v10.
>
> v10:
> - patch 1: dropped magic numbers from PHY driver
> - patch 5: allow pcie child nodes without reset-gpios
> - all other patches are identical to v9.
>
> v9:
> - Did some cleanups at patches 1 and 5
>
> Mauro Carvalho Chehab (13):
> PCI: kirin: Reorganize the PHY logic inside the driver
> PCI: kirin: Add support for a PHY layer
> PCI: kirin: Use regmap for APB registers
> PCI: kirin: Add support for bridge slot DT schema
> PCI: kirin: Give more time for PERST# reset to finish
> PCI: kirin: Add Kirin 970 compatible
> PCI: kirin: Add MODULE_* macros
> PCI: kirin: Allow building it as a module
> PCI: kirin: Add power_off support for Kirin 960 PHY
> PCI: kirin: Move the power-off code to a common routine
> PCI: kirin: Disable clkreq during poweroff sequence
> PCI: kirin: De-init the dwc driver
> PCI: kirin: Allow removing the driver
>
> drivers/pci/controller/dwc/Kconfig | 2 +-
> drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------
> 2 files changed, 497 insertions(+), 148 deletions(-)
Applied to pci/dwc for v5.16, please have a look at the resulting
branch and commits.
Thanks,
Lorenzo