[PATCH v3 01/14] staging: media: zoran: move module parameter checks to zoran_probe

From: Corentin Labbe
Date: Tue Oct 26 2021 - 15:34:38 EST


We need to empty zoran_init() for removing it later.
Furthermore, this permit to use pci_xxx instead of pr_xxx for prettier
printing.

Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
drivers/staging/media/zoran/zoran_card.c | 64 ++++++++++++------------
1 file changed, 33 insertions(+), 31 deletions(-)

diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index f259585b0689..3bc0e64f1007 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -1067,6 +1067,39 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
unsigned int nr;
int err;

+ pci_info(pdev, "Zoran MJPEG board driver version %s\n", ZORAN_VERSION);
+
+ /* check the parameters we have been given, adjust if necessary */
+ if (v4l_nbufs < 2)
+ v4l_nbufs = 2;
+ if (v4l_nbufs > VIDEO_MAX_FRAME)
+ v4l_nbufs = VIDEO_MAX_FRAME;
+ /* The user specifies the in KB, we want them in byte (and page aligned) */
+ v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024);
+ if (v4l_bufsize < 32768)
+ v4l_bufsize = 32768;
+ /* 2 MB is arbitrary but sufficient for the maximum possible images */
+ if (v4l_bufsize > 2048 * 1024)
+ v4l_bufsize = 2048 * 1024;
+ if (jpg_nbufs < 4)
+ jpg_nbufs = 4;
+ if (jpg_nbufs > BUZ_MAX_FRAME)
+ jpg_nbufs = BUZ_MAX_FRAME;
+ jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024);
+ if (jpg_bufsize < 8192)
+ jpg_bufsize = 8192;
+ if (jpg_bufsize > (512 * 1024))
+ jpg_bufsize = 512 * 1024;
+ /* Use parameter for vidmem or try to find a video card */
+ if (vidmem)
+ pci_info(pdev, "%s: Using supplied video memory base address @ 0x%lx\n",
+ ZORAN_NAME, vidmem);
+
+ /* some mainboards might not do PCI-PCI data transfer well */
+ if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK))
+ pci_warn(pdev, "%s: chipset does not support reliable PCI-PCI DMA\n",
+ ZORAN_NAME);
+
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
return -ENODEV;
@@ -1285,37 +1318,6 @@ static int __init zoran_init(void)
{
int res;

- pr_info("Zoran MJPEG board driver version %s\n", ZORAN_VERSION);
-
- /* check the parameters we have been given, adjust if necessary */
- if (v4l_nbufs < 2)
- v4l_nbufs = 2;
- if (v4l_nbufs > VIDEO_MAX_FRAME)
- v4l_nbufs = VIDEO_MAX_FRAME;
- /* The user specifies the in KB, we want them in byte (and page aligned) */
- v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024);
- if (v4l_bufsize < 32768)
- v4l_bufsize = 32768;
- /* 2 MB is arbitrary but sufficient for the maximum possible images */
- if (v4l_bufsize > 2048 * 1024)
- v4l_bufsize = 2048 * 1024;
- if (jpg_nbufs < 4)
- jpg_nbufs = 4;
- if (jpg_nbufs > BUZ_MAX_FRAME)
- jpg_nbufs = BUZ_MAX_FRAME;
- jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024);
- if (jpg_bufsize < 8192)
- jpg_bufsize = 8192;
- if (jpg_bufsize > (512 * 1024))
- jpg_bufsize = 512 * 1024;
- /* Use parameter for vidmem or try to find a video card */
- if (vidmem)
- pr_info("%s: Using supplied video memory base address @ 0x%lx\n", ZORAN_NAME, vidmem);
-
- /* some mainboards might not do PCI-PCI data transfer well */
- if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK))
- pr_warn("%s: chipset does not support reliable PCI-PCI DMA\n", ZORAN_NAME);
-
res = pci_register_driver(&zoran_driver);
if (res) {
pr_err("Unable to register ZR36057 driver\n");
--
2.32.0