Re: [PATCH v3] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm

[tjiang]

Hi Matthias:
  the previous patch is submitted by zijun , as he is not working on 
this project, I take over his job, so can we assume abandon the previous 
patch, using my new patch ? thank you.
regards.
tim

On 2021-10-27 00:24, Matthias Kaehlcke wrote:
> On Fri, Oct 22, 2021 at 01:35:38PM +0800, tjiang@xxxxxxxxxxxxxx wrote:
> > the RF performance of wcn6855 soc chip from different foundries will 
> > be
> > difference, so we should use different nvm to configure them.
> >
> > Signed-off-by: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
> > ---
> >  drivers/bluetooth/btusb.c | 55
> > +++++++++++++++++++++++++++++++++++------------
> >  1 file changed, 41 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 87b71740fad8..a5fe57e7cd7e 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -3195,6 +3195,9 @@ static int btusb_set_bdaddr_wcn6855(struct 
> > hci_dev
> > *hdev,
> >  #define QCA_DFU_TIMEOUT		3000
> >  #define QCA_FLAG_MULTI_NVM      0x80
> >
> > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> > +
> >  struct qca_version {
> >  	__le32	rom_version;
> >  	__le32	patch_version;
> > @@ -3226,6 +3229,7 @@ static const struct qca_device_info
> > qca_devices_table[] = {
> >  	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> >  	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> >  	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> > +	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> >  };
> >
> >  static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 
> > request,
> > @@ -3380,6 +3384,42 @@ static int btusb_setup_qca_load_rampatch(struct
> > hci_dev *hdev,
> >  	return err;
> >  }
> >
> > +static void btusb_generate_qca_nvm_name(char *fwname,
> > +					size_t max_size,
> > +					const struct qca_version *ver)
> > +{
> > +	u32 rom_version = le32_to_cpu(ver->rom_version);
> > +	u16 flag = le16_to_cpu(ver->flag);
> > +
> > +	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> > +		u16 board_id = le16_to_cpu(ver->board_id);
> > +		u32 ram_version = le32_to_cpu(ver->ram_version);
> > +		const char *variant = NULL;
>
> This assignement was introduced in v3, it isn't really useful since the
> variable is always assigned to a value in the switch statement below.
>
> btw, why did you reset the patch version numbers, earlier they went up
> to v11? This is confusing, e.g. when someone mentions v3 of this patch,
> are they referring to this version or to
> https://patchwork.kernel.org/project/bluetooth/patch/1628758216-3201-1-git-send-email-zijuhu@xxxxxxxxxxxxxx/?
>
> > +
> > +		switch (ram_version) {
> > +		case WCN6855_2_0_RAM_VERSION_GF:
> > +		case WCN6855_2_1_RAM_VERSION_GF:
> > +			variant = "_gf";
> > +			break;
> > +		default:
> > +			variant = "";
> > +			break;
> > +		}
> > +
> > +		if (board_id == 0) {
> > +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
> > +				rom_version, variant);
> > +		} else {
> > +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
> > +				rom_version, variant, board_id);
> > +		}
> > +	} else {
> > +		snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
> > +			rom_version);
> > +	}
> > +
> > +}
> > +
> >  static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> >  				    struct qca_version *ver,
> >  				    const struct qca_device_info *info)
> > @@ -3388,20 +3428,7 @@ static int btusb_setup_qca_load_nvm(struct 
> > hci_dev
> > *hdev,
> >  	char fwname[64];
> >  	int err;
> >
> > -	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> > -		/* if boardid equal 0, use default nvm without surfix */
> > -		if (le16_to_cpu(ver->board_id) == 0x0) {
> > -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> > -				 le32_to_cpu(ver->rom_version));
> > -		} else {
> > -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> > -				le32_to_cpu(ver->rom_version),
> > -				le16_to_cpu(ver->board_id));
> > -		}
> > -	} else {
> > -		snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> > -			 le32_to_cpu(ver->rom_version));
> > -	}
> > +	btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
> >
> >  	err = request_firmware(&fw, fwname, &hdev->dev);
> >  	if (err) {
> > --
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
> > Forum, a
> > Linux Foundation Collaborative Project