Re: [PATCH 1/1] riscv: defconfig: enable DRM_NOUVEAU

From: Heinrich Schuchardt
Date: Wed Oct 27 2021 - 03:32:00 EST


On 10/27/21 04:31, Damien Le Moal wrote:
On 2021/10/27 8:58, Palmer Dabbelt wrote:
On Tue, 12 Oct 2021 09:46:58 PDT (-0700), heinrich.schuchardt@xxxxxxxxxxxxx wrote:
Both RADEON and NOUVEAU graphics cards are supported on RISC-V. Enabling
the one and not the other does not make sense.

As typically at most one of RADEON, NOUVEAU, or VIRTIO GPU support will be
needed DRM drivers should be compiled as modules.

Do you have an nVidia card that works on real hardware? Last I checked
was a while ago, but they weren't working at the time (IIRC it was
something to do with PCIe addressing, but it was a hardware limitation
so I don't remember exactly how it all fits together).

If they work then I'm happy to flip them on.

My SiFive Unmatched is running KDE on a GT710.

It would be unfair to treat the two major GPU vendors AMD and Nvidia differently.


Why enable this at all ? If they do not work, then disabling theses cards make
sense. But if they do work, isn't leaving the config to be the default defined
by the driver the preferred approach ? Otherwise, we will eventually end-up with
a defconfig that has everything enabled...

If you want to get your system up, having keyboard input and GPU output is the bare minimum that you need to proceed unless you are a developer working over UART and have a second system available.

To keep the kernel small DRM drivers should be modules.

Best regards

Heinrich



Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx>
---
arch/riscv/configs/defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 4ebc80315f01..c252fd5706d2 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -72,9 +72,10 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_POWER_RESET=y
-CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
-CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_VIRTIO_GPU=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y

_______________________________________________
linux-riscv mailing list
linux-riscv@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-riscv