[PATCH] Revert "firmware: qcom: scm: Add support for MC boot address API"
From: Arnd Bergmann
Date: Wed Oct 27 2021 - 10:28:11 EST
From: Arnd Bergmann <arnd@xxxxxxxx>
This reverts commits 55845f46df03 and c50031f03dfe, since this still
causes a build failure when QCOM_SCM is a loadable module, or when
CONFIG_SMP is disabled:
ERROR: modpost: "cpu_logical_map" [drivers/firmware/qcom-scm.ko] undefined!
This be done better for 5.17, but it's too late now to rework
properly.
Fixes: c50031f03dfe ("firmware: qcom: scm: Don't break compile test on non-ARM platforms")
Fixes: 55845f46df03 ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
I've applied this revert to the arm/drivers branch now
drivers/firmware/qcom_scm.c | 94 +++++++------------------------------
drivers/firmware/qcom_scm.h | 4 --
2 files changed, 17 insertions(+), 81 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 11464f6502be..7db8066b19fd 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -17,10 +17,6 @@
#include <linux/reset-controller.h>
#include <linux/arm-smccc.h>
-#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-#include <asm/smp_plat.h>
-#endif
-
#include "qcom_scm.h"
static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
@@ -264,44 +260,15 @@ static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
return ret ? false : !!res.result[0];
}
-#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
-static int __qcom_scm_set_boot_addr_mc(void *entry, const cpumask_t *cpus,
- unsigned int flags)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR_MC,
- .owner = ARM_SMCCC_OWNER_SIP,
- .arginfo = QCOM_SCM_ARGS(6),
- };
- unsigned int cpu;
- u64 map;
-
- /* Need a device for DMA of the additional arguments */
- if (!__scm || __get_convention() == SMC_CONVENTION_LEGACY)
- return -EOPNOTSUPP;
-
- desc.args[0] = virt_to_phys(entry);
- for_each_cpu(cpu, cpus) {
- map = cpu_logical_map(cpu);
- desc.args[1] |= BIT(MPIDR_AFFINITY_LEVEL(map, 0));
- desc.args[2] |= BIT(MPIDR_AFFINITY_LEVEL(map, 1));
- desc.args[3] |= BIT(MPIDR_AFFINITY_LEVEL(map, 2));
- }
- desc.args[4] = ~0ULL; /* Reserved for affinity level 3 */
- desc.args[5] = flags;
-
- return qcom_scm_call(__scm->dev, &desc, NULL);
-}
-#else
-static inline int __qcom_scm_set_boot_addr_mc(void *entry, const cpumask_t *cpus,
- unsigned int flags)
-{
- return -EINVAL;
-}
-#endif
-
-static int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
int ret;
int flags = 0;
@@ -337,28 +304,17 @@ static int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
return ret;
}
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
*/
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
-{
- if (!cpus || cpumask_empty(cpus))
- return -EINVAL;
-
- if (__qcom_scm_set_boot_addr_mc(entry, cpus, QCOM_SCM_BOOT_MC_FLAG_WARMBOOT))
- /* Fallback to old SCM call */
- return __qcom_scm_set_warm_boot_addr(entry, cpus);
- return 0;
-}
-EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
-
-static int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
int flags = 0;
int cpu;
@@ -375,6 +331,9 @@ static int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
.owner = ARM_SMCCC_OWNER_SIP,
};
+ if (!cpus || cpumask_empty(cpus))
+ return -EINVAL;
+
for_each_cpu(cpu, cpus) {
if (cpu < ARRAY_SIZE(scm_cb_flags))
flags |= scm_cb_flags[cpu];
@@ -387,25 +346,6 @@ static int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
-
-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-{
- if (!cpus || cpumask_empty(cpus))
- return -EINVAL;
-
- if (__qcom_scm_set_boot_addr_mc(entry, cpus, QCOM_SCM_BOOT_MC_FLAG_COLDBOOT))
- /* Fallback to old SCM call */
- return __qcom_scm_set_cold_boot_addr(entry, cpus);
- return 0;
-}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
/**
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 2a6a87b75231..d92156ceb3ac 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -78,12 +78,8 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_BOOT_SET_ADDR 0x01
#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
-#define QCOM_SCM_BOOT_SET_ADDR_MC 0x11
#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-#define QCOM_SCM_BOOT_MC_FLAG_AARCH64 BIT(0)
-#define QCOM_SCM_BOOT_MC_FLAG_COLDBOOT BIT(1)
-#define QCOM_SCM_BOOT_MC_FLAG_WARMBOOT BIT(2)
#define QCOM_SCM_SVC_PIL 0x02
#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x01
--
2.29.2