[PATCH v2 2/3] wcn36xx: implement flush op to speed up connected scan

From: Benjamin Li
Date: Wed Oct 27 2021 - 13:03:30 EST


Without ieee80211_ops->flush implemented to empty HW queues, mac80211 will
do a 100ms dead wait after stopping SW queues, before leaving the operating
channel to resume a software connected scan[1].
(see ieee80211_scan_state_resume)

This wait is correctly included in the calculation for whether or not
we've exceeded max off-channel time, as it occurs after sending the null
frame with PS bit set. Thus, with 125 ms max off-channel time we only
have 25 ms of scan time, which technically isn't even enough to scan one
channel (although mac80211 always scans at least one channel per off-
channel window).

Moreover, for passive probes we end up spending at least 100 ms + 111 ms
(IEEE80211_PASSIVE_CHANNEL_TIME) "off-channel"[2], which exceeds the listen
interval of 200 ms that we provide in our association request frame. That's
technically out-of-spec.

[1]: Until recently, wcn36xx performed software (rather than FW-offloaded)
scanning when 5GHz channels are requested. This apparent limitation is now
resolved -- see commit 1395f8a6a4d5 ("wcn36xx: Enable hardware scan offload
for 5Ghz band").
[2]: in quotes because about 100 ms of it is still on-channel but with PS
set

Signed-off-by: Benjamin Li <benl@xxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 47 +++++++++++++++++++++++++
drivers/net/wireless/ath/wcn36xx/dxe.h | 1 +
drivers/net/wireless/ath/wcn36xx/main.c | 11 ++++++
3 files changed, 59 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index aff04ef662663..fd627c9f3d409 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -834,6 +834,53 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
return ret;
}

+static bool _wcn36xx_dxe_tx_channel_is_empty(struct wcn36xx_dxe_ch *ch)
+{
+ unsigned long flags;
+ struct wcn36xx_dxe_ctl *ctl_bd_start, *ctl_skb_start;
+ struct wcn36xx_dxe_ctl *ctl_bd, *ctl_skb;
+ bool ret = true;
+
+ spin_lock_irqsave(&ch->lock, flags);
+
+ /* Loop through ring buffer looking for nonempty entries. */
+ ctl_bd_start = ch->head_blk_ctl;
+ ctl_bd = ctl_bd_start;
+ ctl_skb_start = ctl_bd_start->next;
+ ctl_skb = ctl_skb_start;
+ do {
+ if (ctl_skb->skb) {
+ ret = false;
+ goto unlock;
+ }
+ ctl_bd = ctl_skb->next;
+ ctl_skb = ctl_bd->next;
+ } while (ctl_skb != ctl_skb_start);
+
+unlock:
+ spin_unlock_irqrestore(&ch->lock, flags);
+ return ret;
+}
+
+int wcn36xx_dxe_tx_flush(struct wcn36xx *wcn)
+{
+ int i = 0;
+
+ /* Called with mac80211 queues stopped. Wait for empty HW queues. */
+ do {
+ if (_wcn36xx_dxe_tx_channel_is_empty(&wcn->dxe_tx_l_ch) &&
+ _wcn36xx_dxe_tx_channel_is_empty(&wcn->dxe_tx_h_ch)) {
+ return 0;
+ }
+ /* This ieee80211_ops callback is specifically allowed to
+ * sleep.
+ */
+ usleep_range(1000, 1100);
+ } while (++i < 100);
+
+ return -EBUSY;
+}
+
int wcn36xx_dxe_init(struct wcn36xx *wcn)
{
int reg_data = 0, ret;
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.h b/drivers/net/wireless/ath/wcn36xx/dxe.h
index 31b81b7547a32..26a31edf52e99 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.h
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.h
@@ -466,5 +466,6 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
struct wcn36xx_tx_bd *bd,
struct sk_buff *skb,
bool is_low);
+int wcn36xx_dxe_tx_flush(struct wcn36xx *wcn);
void wcn36xx_dxe_tx_ack_ind(struct wcn36xx *wcn, u32 status);
#endif /* _DXE_H_ */
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 0b0f8ce729dd1..18383d0fc0933 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1278,6 +1278,16 @@ static void wcn36xx_ipv6_addr_change(struct ieee80211_hw *hw,
}
#endif

+static void wcn36xx_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ u32 queues, bool drop)
+{
+ struct wcn36xx *wcn = hw->priv;
+
+ if (wcn36xx_dxe_tx_flush(wcn)) {
+ wcn36xx_err("Failed to flush hardware tx queues\n");
+ }
+}
+
static const struct ieee80211_ops wcn36xx_ops = {
.start = wcn36xx_start,
.stop = wcn36xx_stop,
@@ -1305,6 +1315,7 @@ static const struct ieee80211_ops wcn36xx_ops = {
#if IS_ENABLED(CONFIG_IPV6)
.ipv6_addr_change = wcn36xx_ipv6_addr_change,
#endif
+ .flush = wcn36xx_flush,

CFG80211_TESTMODE_CMD(wcn36xx_tm_cmd)
};
--
2.25.1