[PATCH] USB: serial: simple: add sierra wireless xm1210 gnss receiver

[ferlandm]

From: Marc Ferland <ferlandm@xxxxxxxxx>

Add device id for the Sierra Wireless XM1210 Multi-GNSS module.

https://www.sierrawireless.com/iot-solutions/products/xm1210/

$ lsusb -vd 1199:b000

Bus 002 Device 003: ID 1199:b000 Sierra Wireless, Inc. Sierra Wireless_GNSS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1199 Sierra Wireless, Inc.
  idProduct          0xb000
  bcdDevice            0.01
  iManufacturer           1 Sierra-wireless
  iProduct                2 Sierra Wireless_GNSS
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0020
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               50mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         0
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Device is also working correctly with:

$ echo 0x1199 0xb000 > /sys/bus/usb-serial/drivers/generic/new_id

Signed-off-by: Marc Ferland <ferlandm@xxxxxxxxx>
---
 drivers/usb/serial/Kconfig             | 1 +
 drivers/usb/serial/usb-serial-simple.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index de5c01257060..8008c8cbaaa0 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -68,6 +68,7 @@ config USB_SERIAL_SIMPLE
 		- Motorola Tetra devices
 		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
+		- Sierra Wireless GPS receiver.
 		- ViVOtech ViVOpay USB device.
 		- Infineon Modem Flashloader USB interface
 		- ZIO Motherboard USB serial interface
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index bd23a7cb1be2..9ffd24c7fb33 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -112,6 +112,11 @@ DEVICE(suunto, SUUNTO_IDS);
 	{ USB_DEVICE(0x908, 0x0004) }
 DEVICE(siemens_mpi, SIEMENS_IDS);
 
+/* Sierra Wireless_GNSS driver */
+#define SIERRA_IDS()		\
+	{ USB_DEVICE(0x1199, 0xb000) }
+DEVICE(sierra, SIERRA_IDS);
+
 /* All of the above structures mushed into two lists */
 static struct usb_serial_driver * const serial_drivers[] = {
 	&carelink_device,
@@ -127,6 +132,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&hp4x_device,
 	&suunto_device,
 	&siemens_mpi_device,
+	&sierra_device,
 	NULL
 };
 
@@ -144,6 +150,7 @@ static const struct usb_device_id id_table[] = {
 	HP4X_IDS(),
 	SUUNTO_IDS(),
 	SIEMENS_IDS(),
+	SIERRA_IDS(),
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
2.30.2