[PATCH v12 3/5] arm64: perf: Add userspace counter access disable switch

[Rob Herring]

Like x86, some users may want to disable userspace PMU counter
altogether. Add a sysctl 'perf_user_access' file to control userspace
counter access. The default is '0' which is disabled. Writing '1'
enables access.

Note that x86 supports globally enabling user access by writing '2' to
/sys/bus/event_source/devices/cpu/rdpmc. As there's not existing
userspace support to worry about, this shouldn't be necessary for Arm.
It could be added later if the need arises.

Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Cc: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
Cc: Jiri Olsa <jolsa@xxxxxxxxxx>
Cc: Namhyung Kim <namhyung@xxxxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: linux-perf-users@xxxxxxxxxxxxxxx
Acked-by: Will Deacon <will@xxxxxxxxxx>
Reviewed-by: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
v11:
 - Move custom handler to next patch
v10:
 - Add documentation
 - Use a custom handler (needed on the next patch)
v9:
 - Use sysctl instead of sysfs attr
 - Default to disabled
v8:
 - New patch
---
 Documentation/admin-guide/sysctl/kernel.rst | 11 +++++++++++
 arch/arm64/kernel/perf_event.c              | 17 +++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 426162009ce9..346a0dba5703 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -905,6 +905,17 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
 The default value is 8.
 
 
+perf_user_access (arm64 only)
+=================================
+
+Controls user space access for reading perf event counters. When set to 1,
+user space can read performance monitor counter registers directly.
+
+The default value is 0 (access disabled).
+
+See Documentation/arm64/perf.rst for more information.
+
+
 pid_max
 =======
 
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index b4044469527e..6ae20c4217af 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -286,6 +286,8 @@ static const struct attribute_group armv8_pmuv3_events_attr_group = {
 PMU_FORMAT_ATTR(event, "config:0-15");
 PMU_FORMAT_ATTR(long, "config1:0");
 
+static int sysctl_perf_user_access __read_mostly;
+
 static inline bool armv8pmu_event_is_64bit(struct perf_event *event)
 {
 	return event->attr.config1 & 0x1;
@@ -1104,6 +1106,19 @@ static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu)
 	return probe.present ? 0 : -ENODEV;
 }
 
+static struct ctl_table armv8_pmu_sysctl_table[] = {
+	{
+		.procname       = "perf_user_access",
+		.data		= &sysctl_perf_user_access,
+		.maxlen		= sizeof(unsigned int),
+		.mode           = 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{ }
+};
+
 static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
 			  int (*map_event)(struct perf_event *event),
 			  const struct attribute_group *events,
@@ -1136,6 +1151,8 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_CAPS] = caps ?
 			caps : &armv8_pmuv3_caps_attr_group;
 
+	register_sysctl("kernel", armv8_pmu_sysctl_table);
+
 	return 0;
 }
 
-- 
2.32.0