Re: [PATCH v5 3/6] drm/mediatek: Detect CMDQ execution timeout
From: Fei Shao
Date: Wed Oct 27 2021 - 23:19:54 EST
Hi Chun-Kuang,
On Thu, Oct 28, 2021 at 7:47 AM Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> wrote:
>
> Hi, Fei:
>
> Fei Shao <fshao@xxxxxxxxxxxx> 於 2021年10月27日 週三 下午5:32寫道:
> >
> > Hi Jason,
> >
> > On Wed, Oct 27, 2021 at 10:19 AM jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx> wrote:
> > >
> > > From: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
> > >
> > > CMDQ is used to update display register in vblank period, so
> > > it should be execute in next 2 vblank. One vblank interrupt
> > > before send message (occasionally) and one vblank interrupt
> > > after cmdq done. If it fail to execute in next 3 vblank,
> > > tiemout happen.
> > >
> > > Signed-off-by: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
> > > Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx>
> > > Reviewed-by: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 20 ++++++++++++++++++--
> > > 1 file changed, 18 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > index e23e3224ac67..dad1f85ee315 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > @@ -54,6 +54,7 @@ struct mtk_drm_crtc {
> > > #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > > struct cmdq_client cmdq_client;
> > > u32 cmdq_event;
> > > + u32 cmdq_vblank_cnt;
> > > #endif
> > >
> > > struct device *mmsys_dev;
> > > @@ -227,7 +228,10 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
> > > static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg)
> > > {
> > > struct cmdq_cb_data *data = mssg;
> > > + struct cmdq_client *cmdq_cl = container_of(cl, struct cmdq_client, client);
> > > + struct mtk_drm_crtc *mtk_crtc = container_of(cmdq_cl, struct mtk_drm_crtc, cmdq_client);
> > >
> > > + mtk_crtc->cmdq_vblank_cnt = 0;
> > > cmdq_pkt_destroy(data->pkt);
> > > }
> > > #endif
> > > @@ -483,6 +487,15 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc,
> > > cmdq_handle->pa_base,
> > > cmdq_handle->cmd_buf_size,
> > > DMA_TO_DEVICE);
> > > + /*
> > > + * CMDQ command should execute in next 3 vblank.
> > > + * One vblank interrupt before send message (occasionally)
> > > + * and one vblank interrupt after cmdq done,
> > > + * so it's timeout after 3 vblank interrupt.
> > > + * If it fail to execute in next 3 vblank, timeout happen.
> > > + */
> > > + mtk_crtc->cmdq_vblank_cnt = 3;
> > > +
> > > mbox_send_message(mtk_crtc->cmdq_client.chan, cmdq_handle);
> > > mbox_client_txdone(mtk_crtc->cmdq_client.chan, 0);
> > > }
> > > @@ -499,11 +512,14 @@ static void mtk_crtc_ddp_irq(void *data)
> > >
> > > #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > > if (!priv->data->shadow_register && !mtk_crtc->cmdq_client.chan)
> > > + mtk_crtc_ddp_config(crtc, NULL);
> > > + else if (mtk_crtc->cmdq_vblank_cnt > 0 && --mtk_crtc->cmdq_vblank_cnt == 0)
> > I think atomic_dec_and_test() does what you want to do here.
>
> I think this operation is not necessary to be atomic operation, and
> this statement could be reduced to
>
> else if (--mtk_crtc->cmdq_vblank_cnt == 0)
I was thinking about using existing helpers to wrap up the counter
operations, but I agree that it's not necessary.
Just dropping the redundant check would be good enough.
>
> >
> > > + DRM_ERROR("mtk_crtc %d CMDQ execute command timeout!\n",
> > > + drm_crtc_index(&mtk_crtc->base));
> > > #else
> > > if (!priv->data->shadow_register)
> > > -#endif
> > > mtk_crtc_ddp_config(crtc, NULL);
> > > -
> > > +#endif
> > > mtk_drm_finish_page_flip(mtk_crtc);
> > > }
> > >
> > > --
> > > 2.18.0
> > >