[PATCH V3 4/4] arm64: dts: qcom: sc7280: Add pm8008 regulators support for sc7280-idp

[Satya Priya]

Add pm8008 regulators support for sc7280 idp.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V2:
 - As per Stephen's comments, replaced '_' with '-' for node names.

Changes in V3:
 - Changed the regulator node names as l1, l2 etc
 - Changed "pm8008-regulators" to "regulators"
 - Changed "qcom,min-dropout-voltage" to "regulator-min-dropout-voltage-microvolt"

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 103 +++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..493575b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -309,6 +309,97 @@
 	};
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pm8008_chip: pm8008@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_active>;
+	};
+
+	pm8008_ldo: pm8008@9 {
+		compatible = "qcom,pm8008";
+		reg = <0x9>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulators {
+			compatible = "qcom,pm8008-regulator";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+			vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+			vdd_l5-supply = <&vreg_bob>;
+			vdd_l6-supply = <&vreg_bob>;
+			vdd_l7-supply = <&vreg_bob>;
+
+			pm8008_l1: l1@4000 {
+				reg = <0x4000>;
+				regulator-name = "pm8008_l1";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-min-dropout-voltage-microvolt = <96000>;
+			};
+
+			pm8008_l2: l2@4100 {
+				reg = <0x4100>;
+				regulator-name = "pm8008_l2";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-min-dropout-voltage-microvolt = <24000>;
+			};
+
+			pm8008_l3: l3@4200 {
+				reg = <0x4200>;
+				regulator-name = "pm8008_l3";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-dropout-voltage-microvolt = <224000>;
+			};
+
+			pm8008_l4: l4@4300 {
+				reg = <0x4300>;
+				regulator-name = "pm8008_l4";
+				regulator-min-microvolt = <1504000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-min-dropout-voltage-microvolt = <0>;
+			};
+
+			pm8008_l5: l5@4400 {
+				reg = <0x4400>;
+				regulator-name = "pm8008_l5";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-dropout-voltage-microvolt = <104000>;
+			};
+
+			pm8008_l6: l6@4500 {
+				reg = <0x4500>;
+				regulator-name = "pm8008_l6";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-dropout-voltage-microvolt = <112000>;
+			};
+
+			pm8008_l7: l7@4600 {
+				reg = <0x4600>;
+				regulator-name = "pm8008_l7";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3544000>;
+				regulator-min-dropout-voltage-microvolt = <96000>;
+			};
+		};
+	};
+};
+
 &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
@@ -437,6 +528,18 @@
 	};
 };
 
+&pm8350c_gpios {
+	pm8008-reset {
+		pm8008_active: pm8008-active {
+			pins = "gpio4";
+			function = "normal";
+			bias-disable;
+			output-high;
+			power-source = <0>;
+		};
+	};
+};
+
 &qspi_cs0 {
 	bias-disable;
 };
-- 
2.7.4