Re: [PATCH v7, 04/15] media: mtk-vcodec: Manage multi hardware information
From: yunfei.dong@xxxxxxxxxxxx
Date: Thu Oct 28 2021 - 23:10:50 EST
Hi AngeloGioacchino,
Thanks for your suggestion.
On Thu, 2021-10-14 at 11:20 +0200, AngeloGioacchino Del Regno wrote:
> > Manage each hardware information which includes irq/power/clk.
> > The hardware includes LAT0, LAT1 and CORE.
> >
> > Signed-off-by: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> > ---
> > v7: Using of_platform_populate not component framework to manage
> > multi hardware.
> > ---
> > drivers/media/platform/mtk-vcodec/Makefile | 1 +
> > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 +
> > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 151 ++++++++++++-
> > ---
> > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 165
> > ++++++++++++++++++
> > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 49 ++++++
> > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 +
> > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 1 +
> > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 23 +++
> > 8 files changed, 359 insertions(+), 33 deletions(-)
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_hw.c
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_hw.h
> >
>
>
>
> Hello Yunfei,
>
> thanks for this great series! However, there are a few things to
> improve...
>
> > diff --git a/drivers/media/platform/mtk-vcodec/Makefile
> > b/drivers/media/platform/mtk-vcodec/Makefile
> > index ca8e9e7a9c4e..edeb3b66e9e9 100644
> > --- a/drivers/media/platform/mtk-vcodec/Makefile
> > +++ b/drivers/media/platform/mtk-vcodec/Makefile
> > @@ -15,6 +15,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> > mtk_vcodec_dec_stateful.o \
> > mtk_vcodec_dec_stateless.o \
> > mtk_vcodec_dec_pm.o \
> > + mtk_vcodec_dec_hw.o \
> >
> > mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> > venc/venc_h264_if.o \
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > index 9fbd24186c1a..c509224cbff4 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > @@ -66,6 +66,7 @@ extern const struct v4l2_ioctl_ops
> > mtk_vdec_ioctl_ops;
> > extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
> > extern const struct media_device_ops mtk_vcodec_media_ops;
> >
> > +extern struct platform_driver mtk_vdec_comp_driver;
>
> This may be useless... more on that later in this review.
>
Remove in patch v8.
> >
> > /*
> > * mtk_vdec_lock/mtk_vdec_unlock are for ctx instance to
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> > index dd749d41c75a..17cb3e3519eb 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> > @@ -18,19 +18,61 @@
> >
> > #include "mtk_vcodec_drv.h"
> > #include "mtk_vcodec_dec.h"
> > +#include "mtk_vcodec_dec_hw.h"
> > #include "mtk_vcodec_dec_pm.h"
> > #include "mtk_vcodec_intr.h"
> > -#include "mtk_vcodec_util.h"
> > #include "mtk_vcodec_fw.h"
> >
> > -#define VDEC_HW_ACTIVE 0x10
> > -#define VDEC_IRQ_CFG 0x11
> > -#define VDEC_IRQ_CLR 0x10
> > -#define VDEC_IRQ_CFG_REG 0xa4
> > -
> > module_param(mtk_v4l2_dbg_level, int, 0644);
> > module_param(mtk_vcodec_dbg, bool, 0644);
> >
> > +static struct of_device_id mtk_vdec_drv_ids[] = {
> > + {
> > + .compatible = "mediatek,mtk-vcodec-lat",
> > + .data = (void *)MTK_VDEC_LAT0,
> > + },
> > + {
> > + .compatible = "mediatek,mtk-vcodec-core",
> > + .data = (void *)MTK_VDEC_CORE,
> > + },
> > + {},
> > +};
>
> Is this a duplicate of "mtk_vdec_comp_ids", found in
> mtk_vcodec_dec_hw.c?!
>
Will change it.
> > +
> > +static int mtk_vcodec_comp_device_check(struct mtk_vcodec_ctx
> > *ctx)
> > + {
> > + struct mtk_vcodec_dev *vdec_dev = ctx->dev;
> > + struct platform_device *pdev = vdec_dev->plat_dev;
> > + struct device_node *comp_node;
> > + enum mtk_vdec_hw_id comp_idx;
> > + const struct of_device_id *of_id;
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(mtk_vdec_drv_ids); i++) {
> > + of_id = &mtk_vdec_drv_ids[i];
> > + comp_node = of_find_compatible_node(NULL, NULL,
> > + of_id->compatible);
> > + if (!comp_node)
> > + continue;
> > +
> > + if (!of_device_is_available(comp_node)) {
> > + of_node_put(comp_node);
> > + dev_err(&pdev->dev, "Fail to get MMSYS
> > node\n");
> > + continue;
> > + }
> > +
> > + comp_idx = (enum mtk_vdec_hw_id)of_id->data;
> > + vdec_dev->component_node[comp_idx] = comp_node;
> > +
> > + if (!test_bit(comp_idx, vdec_dev->hardware_bitmap)) {
> > + dev_err(&pdev->dev, "Vdec comp_idx is not ready
> > %d.",
> > + comp_idx);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void
> > *priv)
> > {
> > struct mtk_vcodec_dev *dev = priv;
> > @@ -95,6 +137,41 @@ static int mtk_vcodec_get_reg_bases(struct
> > mtk_vcodec_dev *dev)
> > return 0;
> > }
> >
> > +static int mtk_vcodec_init_dec_params(struct mtk_vcodec_dev *dev)
> > +{
> > + struct platform_device *pdev = dev->plat_dev;
> > + int ret;
> > +
> > + ret = mtk_vcodec_get_reg_bases(dev);
> > + if (ret)
> > + return ret;
> > +
> > + if (!dev->vdec_pdata->is_comp_supported) {
>
> component is never supported (is_comp_supported is always false), so
> this check
> is useless.
8192 need to support new architecture, but 8183 still use the older
one.
>
> > + dev->dec_irq = platform_get_irq(pdev, 0);
> > + if (dev->dec_irq < 0) {
> > + dev_err(&pdev->dev, "failed to get irq
> > number");
> > + return dev->dec_irq;
> > + }
> > +
> > + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> > + ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> > + mtk_vcodec_dec_irq_handler, 0, pdev->name,
> > dev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to install dev-
> > >dec_irq %d (%d)",
> > + dev->dec_irq, ret);
> > + return ret;
> > + }
> > +
> > + ret = mtk_vcodec_init_dec_pm(pdev, &dev->pm);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to get mt vcodec
> > clock source");
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int fops_vcodec_open(struct file *file)
> > {
> > struct mtk_vcodec_dev *dev = video_drvdata(file);
> > @@ -116,6 +193,12 @@ static int fops_vcodec_open(struct file *file)
> > init_waitqueue_head(&ctx->queue);
> > mutex_init(&ctx->lock);
> >
> > + ret = mtk_vcodec_comp_device_check(ctx);
>
> Are you checking available devices outside of a probe function?
> From what I can see, you require that the MMSYS device is available
> at this
> time, but that's something that should be granted if we reach this
> point.
>
> I would say that this driver probe should be deferred until the MMSYS
> device
> becomes available, since it's required for this to work and since,
> once that
> device gets registered and probed successfully, it'll never go away
> (unless
> module unloaded, but you can't unload module A if module B is using
> it, or
> depends on it, unless you also unload module B): like this, you will
> avoid
> performing N useless checks, everytime the userspace opens the vdec
> device.
>
The master device(parent node) is available, but the component(child
node) device is also ready? Need to register irq, open/close power and
clock using component device. This function just used to check whether
the component device is ready to use.
> > + if (ret) {
> > + mtk_v4l2_err("Failed to check vdec comp device.");
> > + goto err_ctrls_setup;
> > + }
> > +
> > ctx->type = MTK_INST_DECODER;
> > ret = dev->vdec_pdata->ctrls_setup(ctx);
> > if (ret) {
> > @@ -220,7 +303,6 @@ static int mtk_vcodec_probe(struct
> > platform_device *pdev)
> > {
> > struct mtk_vcodec_dev *dev;
> > struct video_device *vfd_dec;
> > - struct resource *res;
> > phandle rproc_phandle;
> > enum mtk_vcodec_fw_type fw_type;
> > int ret;
> > @@ -249,32 +331,10 @@ static int mtk_vcodec_probe(struct
> > platform_device *pdev)
> > if (IS_ERR(dev->fw_handler))
> > return PTR_ERR(dev->fw_handler);
> >
> > - ret = mtk_vcodec_init_dec_pm(dev->plat_dev, &dev->pm);
> > - if (ret < 0) {
> > - dev_err(&pdev->dev, "Failed to get mt vcodec clock
> > source");
> > - goto err_dec_pm;
> > - }
> > -
> > - ret = mtk_vcodec_get_reg_bases(dev);
> > - if (ret)
> > - goto err_res;
> > -
> > - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > - if (res == NULL) {
> > - dev_err(&pdev->dev, "failed to get irq resource");
> > - ret = -ENOENT;
> > - goto err_res;
> > - }
> > -
> > - dev->dec_irq = platform_get_irq(pdev, 0);
> > - irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> > - ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> > - mtk_vcodec_dec_irq_handler, 0, pdev->name,
> > dev);
> > + ret = mtk_vcodec_init_dec_params(dev);
> > if (ret) {
> > - dev_err(&pdev->dev, "Failed to install dev->dec_irq %d
> > (%d)",
> > - dev->dec_irq,
> > - ret);
> > - goto err_res;
> > + dev_err(&pdev->dev, "Failed to init pm and registers");
> > + goto err_dec_pm;
> > }
> >
> > mutex_init(&dev->dec_mutex);
> > @@ -329,6 +389,13 @@ static int mtk_vcodec_probe(struct
> > platform_device *pdev)
> > goto err_event_workq;
> > }
> >
> > + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> > + &pdev->dev);
> > + if (ret) {
> > + mtk_v4l2_err("Master device of_platform_populate
> > failed.");
> > + goto err_event_workq;
> > + }
> > +
> > if (dev->vdec_pdata->uses_stateless_api) {
> > dev->mdev_dec.dev = &pdev->dev;
> > strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME,
> > @@ -436,7 +503,25 @@ static struct platform_driver
> > mtk_vcodec_dec_driver = {
> > },
> > };
> >
> > -module_platform_driver(mtk_vcodec_dec_driver);
> > +static struct platform_driver * const mtk_vdec_drivers[] = {
> > + &mtk_vdec_comp_driver,
> > + &mtk_vcodec_dec_driver,
> > +};
>
> I would say that this is not a good idea, since you can simply
> register
> your mtk_vdec_comp_driver in mtk_vcodec_dec_hw.c.
>
Change it.
> > +
> > +static int __init mtk_vdec_init(void)
> > +{
> > + return platform_register_drivers(mtk_vdec_drivers,
> > + ARRAY_SIZE(mtk_vdec_drivers));
> > +}
> > +
> > +static void __exit mtk_vdec_exit(void)
> > +{
> > + platform_unregister_drivers(mtk_vdec_drivers,
> > + ARRAY_SIZE(mtk_vdec_drivers));
> > +}
> > +
> > +module_init(mtk_vdec_init);
> > +module_exit(mtk_vdec_exit);
> >
> > MODULE_LICENSE("GPL v2");
> > MODULE_DESCRIPTION("Mediatek video codec V4L2 decoder driver");
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> > new file mode 100644
> > index 000000000000..3752ccaea284
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> > @@ -0,0 +1,165 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2021 MediaTek Inc.
> > + * Author: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/slab.h>
> > +
> > +#include "mtk_vcodec_drv.h"
> > +#include "mtk_vcodec_dec.h"
> > +#include "mtk_vcodec_dec_hw.h"
> > +#include "mtk_vcodec_dec_pm.h"
> > +#include "mtk_vcodec_intr.h"
> > +#include "mtk_vcodec_util.h"
> > +
> > +static const struct of_device_id mtk_vdec_comp_ids[] = {
> > + {
> > + .compatible = "mediatek,mtk-vcodec-lat",
> > + },
> > + {
> > + .compatible = "mediatek,mtk-vcodec-core",
> > + },
> > + {},
> > +};
>
> I think that you forgot some ".data = " here...
>
Yes, forget to add, thanks.
> > +
> > +static irqreturn_t mtk_vdec_comp_irq_handler(int irq, void *priv)
> > +{
> > + struct mtk_vdec_comp_dev *dev = priv;
> > + struct mtk_vcodec_ctx *ctx;
> > + u32 cg_status;
> > + unsigned int dec_done_status;
> > + void __iomem *vdec_misc_addr = dev->reg_base[VDEC_COMP_MISC] +
> > + VDEC_IRQ_CFG_REG;
> > +
> > + ctx = mtk_vcodec_get_curr_ctx(dev->master_dev);
> > +
> > + /* check if HW active or not */
> > + cg_status = readl(dev->reg_base[VDEC_COMP_SYS]);
> > + if ((cg_status & VDEC_HW_ACTIVE) != 0) {
>
> The "!= 0" can be dropped here, since cg_status is unsigned.
>
Fix
> > + mtk_v4l2_err("vdec active is not 0x0 (0x%08x)",
> > + cg_status);
> > + return IRQ_HANDLED;
> > + }
> > +
> > + dec_done_status = readl(vdec_misc_addr);
> > + if ((dec_done_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) !=
> > + MTK_VDEC_IRQ_STATUS_DEC_SUCCESS)
>
> I suggest to fix the indentation here to increase human readability,
> like so:
>
Will Fix.
> if ((dec_done_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) !=
>
> MTK_VDEC_IRQ_STATUS_DEC_SUCCESS)
>
>
> > + return IRQ_HANDLED;
> > +
> > + /* clear interrupt */
> > + writel(dec_done_status | VDEC_IRQ_CFG, vdec_misc_addr);
> > + writel(dec_done_status & ~VDEC_IRQ_CLR, vdec_misc_addr);
> > +
> > + wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
> > +
> > + mtk_v4l2_debug(3, "wake up ctx %d, dec_done_status=%x",
> > + ctx->id, dec_done_status);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int mtk_vdec_comp_init_irq(struct mtk_vdec_comp_dev *dev)
> > +{
> > + struct platform_device *pdev = dev->plat_dev;
> > + int ret;
> > +
> > + dev->dec_irq = platform_get_irq(pdev, 0);
> > + if (dev->dec_irq < 0) {
> > + dev_err(&pdev->dev, "Failed to get irq resource");
> > + return dev->dec_irq;
> > + }
> > +
> > + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> > + ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> > + mtk_vdec_comp_irq_handler, 0, pdev-
> > >name, dev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to install dev->dec_irq %d
> > (%d)",
> > + dev->dec_irq, ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mtk_vdec_comp_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct mtk_vdec_comp_dev *comp_dev;
> > + struct mtk_vcodec_dev *master_dev;
> > + const struct of_device_id *of_id;
> > + int comp_idx;
> > + int ret;
> > +
> > + if (!dev->parent) {
> > + dev_err(dev, "Vdec parent prob is not ready.");
>
> This is not an error, since it's not a "critical" error, until it
> becomes one (so,
> after max deferral count has been reached).
> I would remove this message entirely, however, if you really want
> this message to
> be here, you should use dev_dbg.
>
Remove error log.
> > + return -EPROBE_DEFER;
> > + }
> > +
> > + master_dev = dev_get_drvdata(dev->parent);
> > + if (!master_dev) {
> > + dev_err(dev, "Failed to get master device.");
>
> Same here.
>
Will remove error log
> > + return -EPROBE_DEFER;
> > + }
> > +
> > + comp_dev = devm_kzalloc(dev, sizeof(*comp_dev), GFP_KERNEL);
> > + if (!comp_dev)
> > + return -ENOMEM;
> > +
> > + comp_dev->plat_dev = pdev;
> > + ret = mtk_vcodec_init_dec_pm(pdev, &comp_dev->pm);
> > + if (ret) {
> > + dev_err(dev, "Failed to get mt vcodec clock source.");
>
> As far as I can see, you have failure prints all over in function
> mtk_vcodec_init_dec_pm, so there's no need to add another print here:
> you can simply return the error value here.
>
Will fix.
> > + return ret;
> > + }
> > +
> > + comp_dev->reg_base[VDEC_COMP_MISC] =
> > + devm_platform_ioremap_resource_byname(pdev, "reg-
> > misc");
> > + if (IS_ERR((__force void *)comp_dev->reg_base[VDEC_COMP_MISC]))
> > {
> > + ret = PTR_ERR((__force void *)comp_dev-
> > >reg_base[VDEC_COMP_MISC]);
> > + goto err;
> > + }
> > +
> > + ret = mtk_vdec_comp_init_irq(comp_dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to register irq handler.\n");
> > + goto err;
> > + }
>
> ...and the same applies here: mtk_vdec_comp_init_irq already prints
> on its own.
>
Will fix
> > +
> > + of_id = of_match_device(mtk_vdec_comp_ids, dev);
> > + if (!of_id) {
> > + dev_err(dev, "Can't get vdec comp device id.\n");
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > +
> > + comp_idx = (enum mtk_vdec_hw_id)of_id->data;
>
> Are you sure that this one is working as expected?
> The only driver that registers compatibles mediatek,mtk-vcodec-lat
> and
> mediatek,mtk-vcodec-core is exactly this one, but there's no .data
> assigned
> to any of the of_device_id entries... and this means that your of_id-
> >data
> will not contain the expected value of type enum mtk_vdec_hw_id.
>
Will fix
> > + if (comp_idx < MTK_VDEC_HW_MAX) {
> > + master_dev->comp_dev[comp_idx] = comp_dev;
> > + comp_dev->comp_idx = comp_idx;
> > + comp_dev->master_dev = master_dev;
> > + comp_dev->reg_base[VDEC_COMP_SYS] =
> > + master_dev->reg_base[VDEC_COMP_SYS];
> > + set_bit(comp_dev->comp_idx, master_dev-
> > >hardware_bitmap);
> > + }
> > +
> > + platform_set_drvdata(pdev, comp_dev);
> > + return 0;
> > +err:
> > + mtk_vcodec_release_dec_pm(&comp_dev->pm);
> > + return ret;
> > +}
> > +
> > +MODULE_DEVICE_TABLE(of, mtk_vdec_comp_ids);
> > +struct platform_driver mtk_vdec_comp_driver = {
>
> The `_comp` here is a name that's making a logical reference to that:
> in this case,
>
> that may confuse developers around. Can you please drop that `_comp`?
>
> That would become `mtk_vdec_driver` instead.
>
Rename the parameters.
>
> Logically, the same applies for the rest - always assuming that it's
> referencing to
> the Linux component API.
>
> > + .probe = mtk_vdec_comp_probe,
> > + .driver = {
> > + .name = "mtk-vdec-comp",
> > + .of_match_table = mtk_vdec_comp_ids,
> > + },
> > +};
>
> Since you're using of_platform_populate, there is no need to register
> this driver
> externally: you can simply register it here (module_platform_driver)
> and it will
> be probed at of_platform_populate time in your parent.
>
Fix to use module_platform_driver.
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
> > new file mode 100644
> > index 000000000000..8d6e818a3474
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
> > @@ -0,0 +1,49 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2021 MediaTek Inc.
> > + * Author: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> > + */
> > +
> > +#ifndef _MTK_VCODEC_DEC_HW_H_
> > +#define _MTK_VCODEC_DEC_HW_H_
> > +
> > +#include <linux/io.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "mtk_vcodec_drv.h"
> > +
> > +#define VDEC_HW_ACTIVE 0x10
> > +#define VDEC_IRQ_CFG 0x11
> > +#define VDEC_IRQ_CLR 0x10
> > +#define VDEC_IRQ_CFG_REG 0xa4
>
> Cosmetic nitpick: either all values in the same column, or simply use
> a space
> instead of tabulations.
>
Will fix using a space.
> > +
> > +/**
> > + * enum mtk_comp_hw_reg_idx - component register base index
> > + */
> > +enum mtk_comp_hw_reg_idx {
> > + VDEC_COMP_SYS,
> > + VDEC_COMP_MISC,
> > + VDEC_COMP_MAX
> > +};
> > +
> > +/**
> > + * struct mtk_vdec_comp_dev - component framwork driver data
>
> You've switched away from the component framework... so this
> structure's
> description seems to be a bit misleading now...
>
Will fix.
> > + * @plat_dev: platform device
> > + * @master_dev: master device
> > + * @reg_base: Mapped address of MTK Vcodec registers.
> > + *
> > + * @dec_irq: decoder irq resource
> > + * @pm: power management control
> > + * @comp_idx: component index
> > + */
> > +struct mtk_vdec_comp_dev {
> > + struct platform_device *plat_dev;
> > + struct mtk_vcodec_dev *master_dev;
> > + void __iomem *reg_base[VDEC_COMP_MAX];
> > +
> > + int dec_irq;
> > + struct mtk_vcodec_pm pm;
> > + int comp_idx;
> > +};
> > +
> > +#endif /* _MTK_VCODEC_DEC_HW_H_ */
> > diff --git a/drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_stateful.c
> > index 59c24b22ab6d..4f9a80ce15d8 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> > @@ -623,4 +623,5 @@ const struct mtk_vcodec_dec_pdata
> > mtk_vdec_8173_pdata = {
> > .num_framesizes = NUM_SUPPORTED_FRAMESIZE,
> > .worker = mtk_vdec_worker,
> > .flush_decoder = mtk_vdec_flush_decoder,
> > + .is_comp_supported = false,
> > };
> > diff --git a/drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_stateless.c
> > index 8f4a1f0a0769..762633572b49 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> > @@ -357,4 +357,5 @@ const struct mtk_vcodec_dec_pdata
> > mtk_vdec_8183_pdata = {
> > .uses_stateless_api = true,
> > .worker = mtk_vdec_worker,
> > .flush_decoder = mtk_vdec_flush_decoder,
> > + .is_comp_supported = false,
>
> component is not supported anywhere, since you've switched away from
> it?!
>
Still need to use, add patch 5 to use it.
> > };
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> > index 973b0b3649c6..ec3850b4c638 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> > @@ -93,6 +93,17 @@ enum mtk_fmt_type {
> > MTK_FMT_FRAME = 2,
> > };
> >
> > +/**
> > + * struct mtk_vdec_hw_id - Hardware index used to separate
> > + * different hardware
> > + */
> > +enum mtk_vdec_hw_id {
> > + MTK_VDEC_CORE,
> > + MTK_VDEC_LAT0,
> > + MTK_VDEC_LAT1,
> > + MTK_VDEC_HW_MAX,
> > +};
> > +
> > /*
> > * struct mtk_video_fmt - Structure used to store information
> > about pixelformats
> > */
> > @@ -331,6 +342,7 @@ enum mtk_chip {
> > *
> > * @chip: chip this decoder is compatible with
> > *
> > + * @is_comp_supported: true: using compoent framework, false: not
> > support
> > * @uses_stateless_api: whether the decoder uses the stateless
> > API with requests
> > */
> >
> > @@ -352,6 +364,7 @@ struct mtk_vcodec_dec_pdata {
> >
> > enum mtk_chip chip;
> >
> > + bool is_comp_supported;
>
> Adding this member looks useless: there's nothing declaring
> is_comp_supported as
> true... not here, not in any other patch of this entire series!
>
Rename is_comp_supported to is_subdev_supported and add patch 5 to use
it.
>
> Regards,
> - Angelo
>
Thanks,
Yunfei Dong