Re: [PATCH v2 11/16] dt-bindings: pinctrl: Add StarFive JH7100 bindings

[Emil Renner Berthing]

On Fri, 29 Oct 2021 at 03:50, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Oct 21, 2021 at 07:42:18PM +0200, Emil Renner Berthing wrote:
> > +patternProperties:
> > +  '-[0-9]*$':
>
> Can you make this more specific. As-is, '-' and 'foo-' are valid.
>
> > +    type: object
> > +    patternProperties:
> > +      '-pins*$':
>
> So foo-pinsssssss is okay? Drop the '*' or use ? if you intend to
> support 'foo-pin'.

Ah, thanks. Both this and the pattern above was taken from
pinctrl/mediatek,mt6779-pinctrl.yaml if anyone feels like fixing that
too. I see now that '-[0-9]+$' and '-pins$' is more common. I'll just
use that.

> > +        type: object
> > +        description: |
> > +          A pinctrl node should contain at least one subnode representing the
> > +          pinctrl groups available on the machine. Each subnode will list the
> > +          pins it needs, and how they should be configured, with regard to
> > +          muxer configuration, bias, input enable/disable, input schmitt
> > +          trigger enable/disable, slew-rate and drive strength.
> > +        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> > +
> > +        properties:
> > +          pins:
> > +            description: |
> > +              The list of pin identifiers that properties in the node apply to.
> > +              This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
> > +              macro. Either this or "pinmux" has to be specified.
> > +
> > +          pinmux:
> > +            description: |
> > +              The list of GPIO identifiers and their mux settings that
> > +              properties in the node apply to. This should be set using the
> > +              GPIOMUX macro. Either this or "pins" has to be specified.
> > +
> > +          bias-disable: true
> > +
> > +          bias-pull-up:
> > +            type: boolean
>
> Already has a type. Need to reference the common schema.

Right, but the common schema specifies one of boolean or uint32. Is
there a way to reference that, but still say that this binding
supports only the boolean version?