Re: [PATCH v16] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller

[Matthias Kaehlcke]

On Fri, Oct 29, 2021 at 11:21:21AM +0800, tjiang@xxxxxxxxxxxxxx wrote:
> the RF performance of wcn6855 soc chip from different foundries will be
> difference, so we should use different nvm to configure them.
> 
> Signed-off-by: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
> ---
>  drivers/bluetooth/btusb.c | 54
> +++++++++++++++++++++++++++++++++++------------
>  1 file changed, 40 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 87b71740fad8..16bb5de3ce2f 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3195,6 +3195,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev
> *hdev,
>  #define QCA_DFU_TIMEOUT		3000
>  #define QCA_FLAG_MULTI_NVM      0x80
> 
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
>  struct qca_version {
>  	__le32	rom_version;
>  	__le32	patch_version;
> @@ -3226,6 +3229,7 @@ static const struct qca_device_info
> qca_devices_table[] = {
>  	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>  	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>  	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> +	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
>  };
> 
>  static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
> @@ -3380,6 +3384,41 @@ static int btusb_setup_qca_load_rampatch(struct
> hci_dev *hdev,
>  	return err;
>  }
> 
> +static void btusb_generate_qca_nvm_name(char *fwname,
> +					size_t max_size,
> +					const struct qca_version *ver)
> +{
> +	u32 rom_version = le32_to_cpu(ver->rom_version);
> +	u16 flag = le16_to_cpu(ver->flag);
> +
> +	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> +		u16 board_id = le16_to_cpu(ver->board_id);
> +		const char *variant ;

Remove blank before the semicolon.

Besides that:

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>