[PATCH] scsi: ufshpb: Properly handle max-single-cmd

[Avri Altman]

The spec recommends that for transfer length larger than the
max-single-cmd attribute (bMAX_ DATA_SIZE_FOR_HPB_SINGLE_CMD) it is
possible to couple pre-reqs with the HPB-READ command.  Being a
recommendation, using pre-reqs can be perceived merely as a mean of
optimization.  A common practice was to send pre-reqs for chunks within
some interval, and leave the READ10 untouched if larger.

Anyway, now that the pre-reqs flows have been opt-out, all the commands
are single commands.  So properly handle this attribute and do not send
HPB-READ for transfer lengths larger than max-single-cmd.

Fixes: 09d9e4d04187 (scsi: ufs: ufshpb: Remove HPB2.0 flows)

Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
 drivers/scsi/ufs/ufshpb.c | 29 +++++++++++++++--------------
 drivers/scsi/ufs/ufshpb.h |  1 -
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index 026a133149dc..40e62d9e2c89 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -394,8 +394,6 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	if (!ufshpb_is_supported_chunk(hpb, transfer_len))
 		return 0;
 
-	WARN_ON_ONCE(transfer_len > HPB_MULTI_CHUNK_HIGH);
-
 	if (hpb->is_hcm) {
 		/*
 		 * in host control mode, reads are the main source for
@@ -1572,7 +1570,7 @@ static void ufshpb_lu_parameter_init(struct ufs_hba *hba,
 	if (ufshpb_is_legacy(hba))
 		hpb->pre_req_max_tr_len = HPB_LEGACY_CHUNK_HIGH;
 	else
-		hpb->pre_req_max_tr_len = HPB_MULTI_CHUNK_HIGH;
+		hpb->pre_req_max_tr_len = hpb_dev_info->max_hpb_single_cmd;
 
 	hpb->lu_pinned_start = hpb_lu_info->pinned_start;
 	hpb->lu_pinned_end = hpb_lu_info->num_pinned ?
@@ -2582,7 +2580,7 @@ void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
 {
 	struct ufshpb_dev_info *hpb_dev_info = &hba->ufshpb_dev;
 	int version, ret;
-	u32 max_hpb_single_cmd = HPB_MULTI_CHUNK_LOW;
+	int max_single_cmd;
 
 	hpb_dev_info->control_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
 
@@ -2598,21 +2596,24 @@ void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
 	if (version == HPB_SUPPORT_LEGACY_VERSION)
 		hpb_dev_info->is_legacy = true;
 
-	pm_runtime_get_sync(hba->dev);
-	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
-		QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD, 0, 0, &max_hpb_single_cmd);
-	pm_runtime_put_sync(hba->dev);
-
-	if (ret)
-		dev_err(hba->dev, "%s: idn: read max size of single hpb cmd query request failed",
-			__func__);
-	hpb_dev_info->max_hpb_single_cmd = max_hpb_single_cmd;
-
 	/*
 	 * Get the number of user logical unit to check whether all
 	 * scsi_device finish initialization
 	 */
 	hpb_dev_info->num_lu = desc_buf[DEVICE_DESC_PARAM_NUM_LU];
+
+	if (hpb_dev_info->is_legacy)
+		return;
+
+	pm_runtime_get_sync(hba->dev);
+	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+		QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD, 0, 0, &max_single_cmd);
+	pm_runtime_put_sync(hba->dev);
+
+	if (ret)
+		hpb_dev_info->max_hpb_single_cmd = HPB_LEGACY_CHUNK_HIGH;
+	else
+		hpb_dev_info->max_hpb_single_cmd = min(max_single_cmd + 1, HPB_MULTI_CHUNK_HIGH);
 }
 
 void ufshpb_init(struct ufs_hba *hba)
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index f15d8fdbce2e..b475dbd78988 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -31,7 +31,6 @@
 
 /* hpb support chunk size */
 #define HPB_LEGACY_CHUNK_HIGH			1
-#define HPB_MULTI_CHUNK_LOW			7
 #define HPB_MULTI_CHUNK_HIGH			255
 
 /* hpb vender defined opcode */
-- 
2.17.1