kernel 5.15 does not boot with 3ware card (never had this issue <= 5.14) - scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out, resetting card

[Justin Piszcz]

Hello,

Issue: 5.15 hangs at boot (hangs when trying to initialize the 3ware card,
have not had this issue with any prior 5.x kernel 5.(0-14).

Arch: x86_64
Kernel: 5.15
Distribution: Debian testing
Note: Upgraded from 5.14.8 to 5.15, the diff between the two .config's is
posted below, thoughts?

dmesg snippet:
-------------------------------
[8.0574191 loop: module loaded
[8.0575251 the cryptoloop driver has been deprecated and will be removed in
in Linux 5.16
[8.057809] LSI 3uare SAS/SATA-RAID Controller device driver for Linux
v3.26.02.000.
[8.3369831 tc: Refined TC clocksource calibration: 3699.999 MHz
[8.3371911 clocksource: tsc: mask: Oxffffffffffffffff max_cycles:
Ox6aaaa900000, max_idle_ns: 881590498719 ns
[8.3375551 clocksource: Switched to clocksource tsc
( ... )
[9.097964] 3u-sas: scsiO: AEN: INFO (0x04:0x0053): Battery capacity test is
overdue:.
[9.201986] scsi host: 3w-sas
[9.305954] 3u-sas: scsi0: Found an LSI 3ware 9750-2414e Controller at
Oxfb760000, IRQ: 45.
[9.6179701 3u-sas: scsi0: Firmuare FH9X 5.12.00.016, BIOS BE9X 5.11.00.007,
Phys: 28.
[30.498007] scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out,
resetting card
[71.4419581 scsi 0:0:0:0: WARNING: (0x06: 0x002C): Command (0x0) timed out,
resetting card.

--

Full configs:
https://installkernel.tripod.com/5.14.txt
https://installkernel.tripod.com/5.15.txt

Diff between 5.14 and 5.15 .config files-- could it be something to do with
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y?

-CONFIG_PRINTK_NMI=y
+CONFIG_ARCH_NR_GPIO=1024
-CONFIG_X86_SYSFB=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSG_COMMON=y
+CONFIG_BLOCK_HOLDER_DEPRECATED=y
+CONFIG_AF_UNIX_OOB=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
+CONFIG_SYSFB=y
+CONFIG_SCSI_COMMON=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
-CONFIG_MANDATORY_FILE_LOCKING=y
+CONFIG_NETFS_STATS=y
+CONFIG_NTFS3_FS=y
+CONFIG_NTFS3_LZX_XPRESS=y
+CONFIG_SMB_SERVER=y
+CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
+CONFIG_SMBFS_COMMON=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y

Thanks,

Justin.