RE: [PATCH V2] clk: imx: gate off peripheral clock slice

From: Peng Fan
Date: Sun Oct 31 2021 - 22:26:55 EST


> Subject: Re: [PATCH V2] clk: imx: gate off peripheral clock slice
>
> Hello Peng, Abel,
>
> On 25.10.21 14:08, Abel Vesa wrote:
> > On 21-10-25 20:29:02, Peng Fan (OSS) wrote:
> >> From: Peng Fan <peng.fan@xxxxxxx>
> >>
> >> The Peripheral clocks are default enabled when SoC power on, and
> >> bootloader not gate off the clocks when booting Linux Kernel.
> >>
> >> So Linux Kernel is not aware the peripheral clocks are enabled and
> >> still take them as disabled because of enable count is zero.
> >>
> >> Then Peripheral clock's source without clock gated off could be
> >> changed when have assigned-parents in device tree
> >>
> >> However, per i.MX8M* reference mannual, "Peripheral clock slices must
> >> be stopped to change the clock source", so need to gate off the the
> >> peripheral clock when registering the clocks to avoid glitch.
> >>
> >> Tested boot on i.MX8MM/P-EVK board
>
> I just noticed this breaks earlycon on an i.MX8MN, I assume because the
> earlycon driver will access unclocked registers.

Not able to reproduce your issue.

root@imx8mnevk:~# uname -a
Linux imx8mnevk 5.15.0-rc7-next-20211029-00001-gbd989abbb94c-dirty #152 SMP Mon Nov 1 10:48:06 CST 2021 aarch64 aarch64 aarch64 GNU/Linux
root@imx8mnevk:~# cat /proc/cmdline
earlycon console=ttymxc1,115200 root=/dev/mmcblk2p2 rootwait rw

>
> On the i.MX8MN, I also noticed that disabling usb_phy_ref hangs the system,
> whether via sysfs or via this patch. Still trying to figure that one out.

root@imx8mnevk:~# cat /sys/kernel/debug/clk/clk_summary | grep usb_phy_ref
usb_phy_ref 0 0 0 100000000 0 0 50000 N

I am using i.MX8MN-EVK board.

Regards,
Peng.

>
> Cheers,
> Ahmad
>
> >> Fixes: d3ff9728134e ("clk: imx: Add imx composite clock")
> >> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> >> ---
> >>
> >> V2:
> >> Add Fixes tag
> >>
> >> drivers/clk/imx/clk-composite-8m.c | 9 ++++++++-
> >> 1 file changed, 8 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/clk/imx/clk-composite-8m.c
> >> b/drivers/clk/imx/clk-composite-8m.c
> >> index 2dfd6149e528..ee41fbf90589 100644
> >> --- a/drivers/clk/imx/clk-composite-8m.c
> >> +++ b/drivers/clk/imx/clk-composite-8m.c
> >> @@ -184,6 +184,7 @@ struct clk_hw *__imx8m_clk_hw_composite(const
> char *name,
> >> struct clk_mux *mux = NULL;
> >> const struct clk_ops *divider_ops;
> >> const struct clk_ops *mux_ops;
> >> + u32 val;
> >>
> >> mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> >> if (!mux)
> >> @@ -216,8 +217,14 @@ struct clk_hw
> *__imx8m_clk_hw_composite(const char *name,
> >> div->width = PCG_PREDIV_WIDTH;
> >> divider_ops = &imx8m_clk_composite_divider_ops;
> >> mux_ops = &clk_mux_ops;
> >> - if (!(composite_flags & IMX_COMPOSITE_FW_MANAGED))
> >> + if (!(composite_flags & IMX_COMPOSITE_FW_MANAGED)) {
> >> flags |= CLK_SET_PARENT_GATE;
> >> + if (!(flags & CLK_IS_CRITICAL)) {
> >> + val = readl(reg);
> >> + val &= ~BIT(PCG_CGC_SHIFT);
> >> + writel(val, reg);
> >> + }
> >> + }
> >
> > Though I'm usually against special cases like this one. I think the
> > clock core needs some generic flag that would read the state from HW
> > on probe and/or another generic flag for disabling on probe.
> >
> > But for now, I'm OK with this:
> >
> > Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>
> >
> >> }
> >>
> >> div->lock = &imx_ccm_lock;
> >> --
> >> 2.30.0
> >>
> >
> >
>
>
> --
> Pengutronix e.K. |
> |
> Steuerwalder Str. 21 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.p
> engutronix.de%2F&amp;data=04%7C01%7Cpeng.fan%40nxp.com%7C626714
> cd2773448a4c0608d99afbc80d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C637711228448591454%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C10
> 00&amp;sdata=235%2BBGnDLUAIorqGKVVt%2BUKlSAf5jT68wq2s5FMDolY%
> 3D&amp;reserved=0 |
> 31137 Hildesheim, Germany | Phone:
> +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |