Re: [RFC V2 0/5] arm64: dts: imx8mm: Enable CSI and OV5640 Camera

From: Tim Harvey
Date: Mon Nov 01 2021 - 19:05:49 EST

Next message: pr-tracker-bot: "Re: [GIT PULL] EFI updates for v5.16"
Previous message: Tommaso Merciai: "Re: [PATCH] arm64: dts: imx8m: add syscon node for display_blk_ctrl module regs"
Next in thread: Adam Ford: "Re: [RFC V2 0/5] arm64: dts: imx8mm: Enable CSI and OV5640 Camera"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Oct 29, 2021 at 4:11 AM Frieder Schrempf
<frieder.schrempf@xxxxxxxxxx> wrote:
>
> On 28.10.21 02:39, Adam Ford wrote:
> > On Sun, Oct 24, 2021 at 7:16 AM Fabio Estevam <festevam@xxxxxxxxx> wrote:
> >>
> >> Hi Adam,
> >>
> >> [Adding Frieder on Cc]
> >>
> >> On Sat, Oct 23, 2021 at 5:35 PM Adam Ford <aford173@xxxxxxxxx> wrote:
> >>>
> >>> The imx8mm appears to have both a CSI bridge and mipi-csi-2 drivers. With
> >>> those enabled, both the imx8mm-evk and imx8mm-beacon boards should be able
> >>> use an OV5640 camera.
> >>>
> >>> The mipi-csi2 driver sets the clock frequency to 333MHz, so the clock parent
> >>> of the CSI1 must be reparented to a faster clock. On the custom NXP kernel,
> >>> they use IMX8MM_SYS_PLL2_1000M, so that is done in the device tree to match.
> >>>
> >>> With the CSI and mipi_csi2 drivers pointing to an OV5640 camera, the media
> >>> pipeline can be configured with the following:
> >>>
> >>> media-ctl --links "'ov5640 1-003c':0->'imx7-mipi-csis.0':0[1]"
> >>>
> >>> The camera and various nodes in the pipeline can be configured for UYVY:
> >>> media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
> >>> media-ctl -v -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"
> >>>
> >>> With that, the media pipeline looks like:
> >>>
> >>>
> >>> Media controller API version 5.15.0
> >>>
> >>> Media device information
> >>> ------------------------
> >>> driver imx7-csi
> >>> model imx-media
> >>> serial
> >>> bus info platform:32e20000.csi
> >>> hw revision 0x0
> >>> driver version 5.15.0
> >>>
> >>> Device topology
> >>> - entity 1: csi (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev0
> >>> pad0: Sink
> >>> [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range]
> >>> <- "imx7-mipi-csis.0":1 [ENABLED,IMMUTABLE]
> >>> pad1: Source
> >>> [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range]
> >>> -> "csi capture":0 [ENABLED,IMMUTABLE]
> >>>
> >>> - entity 4: csi capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video0
> >>> pad0: Sink
> >>> <- "csi":1 [ENABLED,IMMUTABLE]
> >>>
> >>> - entity 10: imx7-mipi-csis.0 (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev1
> >>> pad0: Sink
> >>> [fmt:UYVY8_1X16/640x480 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range]
> >>> <- "ov5640 1-003c":0 [ENABLED]
> >>> pad1: Source
> >>> [fmt:UYVY8_1X16/640x480 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range]
> >>> -> "csi":0 [ENABLED,IMMUTABLE]
> >>>
> >>> - entity 15: ov5640 1-003c (1 pad, 1 link)
> >>> type V4L2 subdev subtype Sensor flags 0
> >>> device node name /dev/v4l-subdev2
> >>> pad0: Source
> >>> [fmt:UYVY8_1X16/640x480@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
> >>> -> "imx7-mipi-csis.0":0 [ENABLED]
> >>>
> >>> When configured, gstreamer can be used to capture 1 frame and store it to a file.
> >>>
> >>> gst-launch-1.0 -v v4l2src num-buffers=1 ! video/x-raw,format=UYVY,width=640,height=480,framerate=60/1 ! filesink location=test
> >>>
> >>> Unfortunately, the video capture never appears to happen. No errors occur, not
> >>> interrupts are recorded and no errors are recorded.
> >>>
> >>> gst-launch-1.0 -v v4l2src num-buffers=1 ! video/x-raw,format=UYVY,width=640,height=480,framerate=60/1 ! filesink location=test
> >>> Setting pipeline to PAUSED ...
> >>> Pipeline is live and does not need PREROLL ...
> >>> Pipeline is PREROLLED ...
> >>> Setting pipeline to [ 114.819632] v4l2_get_link_freq: Link frequency estimated using pixel rate: result might be inaccurate
> >>> PLAYING ...
> >>> New clock: GstSystem[ 114.829203] v4l2_get_link_freq: Consider implementing support for V4L2_CID_LINK_FREQ in the transmitter driver
> >>> Clock
> >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps = video/x-raw, format=(string)UYVY, width=(int)640, height=(int)480, framerate=(fraction)60/1, interlace-mode=(string)progressive, colorimetry=(string)bt709
> >>> /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = video/x-raw, format=(string)UYVY, width=(int)640, height=(int)480, framerate=(fraction)60/1, interlace-mode=(string)progressive, colorimetry=(string)bt709
> >>> /GstPipeline:pipeline0/GstFileSink:filesink0.GstPad:sink: caps = video/x-raw, format=(string)UYVY, width=(int)640, height=(int)480, framerate=(fraction)60/1, interlace-mode=(string)progressive, colorimetry=(string)bt709
> >>> /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = video/x-raw, format=(string)UYVY, width=(int)640, height=(int)480, framerate=(fraction)60/1, interlace-mode=(string)progressive, colorimetry=(string)bt709
> >>>
> >>>
> >>> If anyone has any insight as to what might be wrong, I'd like feedback.
> >>> I posted a device tree that I beleive goes with the newer imx8mm-evk, but
> >>> I do not have this hardware, so I cannot test it.
> >>
> >> It seems that Frieder on Cc managed to get camera capture to work on
> >> i.MX8MM here:
> >> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kontron-electronics.de%2Fsw%2Fmisc%2Flinux%2F-%2Fcommits%2Fv5.10-mx8mm-csi&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7Cfe4f7347385f4185b1c608d999ab75b5%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637709783979195945%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=PbGqhzb2mbUA2SD44%2BosK8rNkK12m1LRd6W4tvkawno%3D&reserved=0
> >>
> >> Hopefully, this can help to figure out what is missing in mainline to
> >> get camera capture to work on i.MX8M.
> >>
> >> I don't have access to an OV5640 camera to connect to the imx8mm-evk
> >> board to try your series.
> >
> > Fabio,
> >
> > Thanks for the heads up on that repo. I was able to use that repo and
> > get still images to capture on an OV5640, but I noticed a fair amount
> > of differences between that repo and what's found in linux-next.
> >
> > Laurent,
> >
> > I haven't exhausted the patch differences, but I found at least a few
> > that appear to be missiing upstream, and I am curious to know if/what
> > your opinion is on whether or not they're needed, since the patches on
> > Frieder's repo appear to come from you.
> > [1] - media: imx: imx7-media-csi: Add i.MX8MM identification
> > [2] - media: imx: imx7_mipi_csis: Don't set reserved CLK_CTRL field on i.MX8MM
> > [3] - media: imx: imx7_mipi_csis: Set dual pixel mode for RAW formats
> >
> > media: imx: imx7_mipi_csis: Set dual pixel mode for RAW formats
> >
> > Maybe these don't need to be applied, but they are 'some' of the
> > differences that I see between this 5.10 branch and linux-next . I
> > know there are more, but
> >
> >
> > [1] - https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kontron-electronics.de%2Fsw%2Fmisc%2Flinux%2F-%2Fcommit%2F8ac7ec6db0c260a871038721886dbdb6660ed84c&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7Cfe4f7347385f4185b1c608d999ab75b5%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637709783979195945%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=j1iuXWljDd8wA5M44KwLCb%2F21tpdOnKZuJazl25bXbQ%3D&reserved=0
> > [2] - https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kontron-electronics.de%2Fsw%2Fmisc%2Flinux%2F-%2Fcommit%2F0b5727c8eba8c370f7db5eace0243f78992a4dbb&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7Cfe4f7347385f4185b1c608d999ab75b5%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637709783979205943%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=buWbZF0tYfVmibQgBbKJM1PF%2Fw7%2BVO9jhXRCI1zf7TI%3D&reserved=0
> > [3] - https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kontron-electronics.de%2Fsw%2Fmisc%2Flinux%2F-%2Fcommit%2F14befa6bc146b10092a6ac5d0ed4d42c87c6cf27&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7Cfe4f7347385f4185b1c608d999ab75b5%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637709783979205943%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=60iLhs0G0FtQegNp9XtVxAhvZEcltdAGGMNAm2l1cSs%3D&reserved=0
> >
> > Frieder et al,
> >
> > Have you (or anyone) tried CSI cameras on anything newer than 5.10? I
> > am curious to see if a regression popped in somewhere, but git bisect
> > will make this difficult since there is a fair amount of variation
> > between this custom repo and the upstream.
>
> No, I haven't done anything with CSI on a more recent kernel. And I only
> used CSI with the tree above and the ADV7280M bridge. I don't have any
> hardware with a sensor/camera.
>
> In case you haven't seen this already, here is a thread with some notes
> about my testing results:
> https://patchwork.kernel.org/project/linux-media/cover/20210215042741.28850-1-laurent.pinchart@xxxxxxxxxxxxxxxx/.
>

For what it's worth I've got another test setup for IMX8MM CSI
capture. I have a Raspberry Pi Camera module v2 connected to an
imx8mm-venice-gw73xx board. This is a IMX219 8.28MP camera with a
4-lane CSI connection.

Putting Adam's patch 'arm64: dts: imx8mm: Add CSI nodes' as well as
the 'blk-ctl series on top of 5.15 and adding support to my dt via:

commit 87f908a57f48bd7375113991434c2923d65506ac (HEAD -> v5.15-venice)
Author: Tim Harvey <tharvey@xxxxxxxxxxxxx>
Date: Wed Oct 27 15:45:23 2021 -0700

arm64: dts: imx8mm-venice-gw73xx: add rpi camera module v2

Add support for rpi camera module v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1). imx219 driver does not
support powerdown-gpios and using gpio1 as reset-gpios

Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 7b00b6b5bb38..b708c80d884b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -35,6 +35,13 @@
};
};

+ cam24m: cam24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "cam24m";
+ };
+
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -100,6 +107,19 @@
};
};

+&csi {
+ status = "okay";
+};
+
+&imx8mm_mipi_csi_in {
+ remote-endpoint = <&imx219_to_mipi_csi2>;
+ data-lanes = <1 2>;
+};
+
+&mipi_csi2 {
+ status = "okay";
+};
+
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
@@ -132,6 +152,25 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ imx219: sensor@10 {
+ compatible = "sony,imx219";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imx219>;
+ reg = <0x10>;
+ clocks = <&cam24m>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+
+ port {
+ /* MIPI CSI-2 bus endpoint */
+ imx219_to_mipi_csi2: endpoint {
+ remote-endpoint = <&imx8mm_mipi_csi_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
};

&pcie_phy {
@@ -297,6 +336,12 @@
>;
};

+ pinctrl_imx219: imx219grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41
+ >;
+ };
+
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41

While the IMX219 supports up to 4 MIPI CSI2 lanes and a variety of
resolutions up to 8MP, the IMX219 driver (drivers/media/i2c/imx219.c)
currently supports only 2 lanes, and a few different resolutions
including 1080p@30fps (cropped FOV), 1640x1232@30fps (2x2 binned),
640x480@30fps (cropped) with RAW8 and RAW10 formats.

I'm setting up the pipeline like this:
media-ctl --links "'imx219 2-0010':0->'imx7-mipi-csis.0':0[1]"
media-ctl -v -V "'imx219 2-0010':0 [fmt:SRGGB10/640x480 field:none]"
media-ctl -v -V "'csi':0 [fmt:SRGGB10/640x480 field:none]"

and capture:
gst-launch-1.0 -v v4l2src num-buffers=1 !
video/x-bayer,format=rggb,width=640,height=480,framerate=30/1 !
filesink location=test

The above hangs after:
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
video/x-bayer, format=(string)rggb, width=(int)640, height=(int)480,
framerate=(fraction)30/1, interlace-mode=(string)progressive
New clock: GstSystemClock
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps =
video/x-bayer, format=(string)rggb, width=(int)640, height=(int)480,
framerate=(fraction)30/1, interlace-mode=(string)progressive
/GstPipeline:pipeline0/GstFileSink:filesink0.GstPad:sink: caps =
video/x-bayer, format=(string)rggb, width=(int)640, height=(int)480,
framerate=(fraction)30/1, interlace-mode=(string)progressive
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps =
video/x-bayer, format=(string)rggb, width=(int)640, height=(int)480,
framerate=(fraction)30/1, interlace-mode=(string)progressive

I've tried Laurent's 'media: imx: imx7_mipi_csis: Set dual pixel mode
for RAW formats' patch with the same results.

Let me know if any of you have some ideas here.

Best regards,

Tim

Next message: pr-tracker-bot: "Re: [GIT PULL] EFI updates for v5.16"
Previous message: Tommaso Merciai: "Re: [PATCH] arm64: dts: imx8m: add syscon node for display_blk_ctrl module regs"
Next in thread: Adam Ford: "Re: [RFC V2 0/5] arm64: dts: imx8mm: Enable CSI and OV5640 Camera"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]