Re: [PATCH v1 3/3] Bluetooth: hci_qca: Add support for QTI bluetooth MAPLE

[Greg KH]

On Tue, Nov 02, 2021 at 03:12:57PM +0800, Zijun Hu wrote:
> From: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
> 
> Add support for MAPLE integrated within SOC, it is mounted on
> a virtual tty port and powered on/off via relevant IOCTL, neither
> IBS nor RAMPATCH downloading is not required.
> 
> Signed-off-by: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
> ---
>  drivers/bluetooth/btqca.c   | 13 ++++++++++++-
>  drivers/bluetooth/btqca.h   | 13 +++++++++++++
>  drivers/bluetooth/hci_qca.c | 47 ++++++++++++++++++++++++++++++++++++++++++++-
>  3 files changed, 71 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74037d2..b83d2ecefe5d 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -255,6 +255,8 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
>  		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
>  		BT_DBG("Length\t\t : %d bytes", length);
>  
> +		if (qca_is_maple(soc_type))
> +			break;
>  		idx = 0;
>  		data = tlv->data;
>  		while (idx < length) {
> @@ -552,6 +554,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
>  
>  	/* Download rampatch file */
> +	if (qca_is_maple(soc_type))
> +		goto download_nvm;
> +
>  	config.type = TLV_TYPE_PATCH;
>  	if (qca_is_wcn399x(soc_type)) {
>  		snprintf(config.fwname, sizeof(config.fwname),
> @@ -580,6 +585,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	/* Give the controller some time to get ready to receive the NVM */
>  	msleep(10);
>  
> +download_nvm:
>  	/* Download NVM configuration */
>  	config.type = TLV_TYPE_NVM;
>  	if (firmware_name)
> @@ -597,6 +603,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	else if (soc_type == QCA_QCA6390)
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/htnv%02x.bin", rom_ver);
> +	else if (qca_is_maple(soc_type))
> +		snprintf(config.fwname, sizeof(config.fwname),
> +			 "qca/mpnv%02x.bin", rom_ver);
>  	else if (soc_type == QCA_WCN6750)
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/msnv%02x.bin", rom_ver);
> @@ -609,6 +618,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
>  		return err;
>  	}
> +	if (qca_is_maple(soc_type))
> +		msleep(MAPLE_NVM_READY_DELAY_MS);
>  
>  	if (soc_type >= QCA_WCN3991) {
>  		err = qca_disable_soc_logging(hdev);
> @@ -637,7 +648,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  		return err;
>  	}
>  
> -	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
> +	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750 || qca_is_maple(soc_type)) {
>  		/* get fw build info */
>  		err = qca_read_fw_build_info(hdev);
>  		if (err < 0)
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 30afa7703afd..0a5a7d1daa71 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -46,6 +46,8 @@
>  
>  #define QCA_FW_BUILD_VER_LEN		255
>  
> +#define MAPLE_NVM_READY_DELAY_MS        1500
> +#define MAPLE_POWER_CONTROL_DELAY_MS    50
>  
>  enum qca_baudrate {
>  	QCA_BAUDRATE_115200 	= 0,
> @@ -145,6 +147,7 @@ enum qca_btsoc_type {
>  	QCA_WCN3991,
>  	QCA_QCA6390,
>  	QCA_WCN6750,
> +	QCA_MAPLE,
>  };
>  
>  #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -167,6 +170,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>  	return soc_type == QCA_WCN6750;
>  }
>  
> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
> +{
> +	return soc_type == QCA_MAPLE;
> +}
> +
>  #else
>  
>  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> @@ -204,6 +212,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>  	return false;
>  }
>  
> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
> +{
> +	return false;
> +}
> +
>  static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>  {
>  	return -EOPNOTSUPP;
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index dd768a8ed7cb..f1d9670719c4 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -70,6 +70,10 @@
>  #define QCA_CRASHBYTE_PACKET_LEN	1096
>  #define QCA_MEMDUMP_BYTE		0xFB
>  
> +#ifndef IOCTL_IPC_BOOT
> +#define IOCTL_IPC_BOOT                  0xBE
> +#endif

You send this command, but never use it.  Where is the driver code that
uses this command?

And why not tabs?

And why is this patch series not properly threaded so tools can pick it
up and find them?

And why the odd named ioctl that is different from other ones in this
file?

And why not just use normal power management hooks for doing things like
turning on and off the hardware like all other drivers?

thanks,

greg k-h