[PATCH v2 2/2] MIPS: Cobalt: Explain GT64111 early PCI fixup

[Pali Rohár]

Properly document why changing PCI Class Code for GT64111 device to Host
Bridge is required as important details were after 20 years forgotten.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>

---
Changes in v2:
* Split from ARM changes
* Removal of Kconfig changes
* Explanation is completely rewritten as as this MIPS Cobalt device
  predates ARM Orion devices and reason is slightly different.
---
 arch/mips/pci/fixup-cobalt.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 44be65c3e6bb..00206ff52988 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -36,6 +36,21 @@
 #define VIA_COBALT_BRD_ID_REG  0x94
 #define VIA_COBALT_BRD_REG_to_ID(reg)	((unsigned char)(reg) >> 4)
 
+/*
+ * Default value of PCI Class Code on GT64111 is PCI_CLASS_MEMORY_OTHER (0x0580)
+ * instead of PCI_CLASS_BRIDGE_HOST (0x0600). Galileo explained this choice in
+ * document "GT-64111 System Controller for RC4640, RM523X and VR4300 CPUs",
+ * section "6.5.3 PCI Autoconfiguration at RESET":
+ *
+ *   Some PCs refuse to configure host bridges if they are found plugged into
+ *   a PCI slot (ask the BIOS vendors why...). The "Memory Controller" Class
+ *   Code does not cause a problem for these non-compliant BIOSes, so we used
+ *   this as the default in the GT-64111.
+ *
+ * So fix the incorrect default value of PCI Class Code. More details are on:
+ * https://lore.kernel.org/r/20211102154831.xtrlgrmrizl5eidl@pali/
+ * https://lore.kernel.org/r/20211102150201.GA11675@xxxxxxxxxxxxxxxx/
+ */
 static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
 {
 	if (dev->devfn == PCI_DEVFN(0, 0) &&
-- 
2.20.1