Re: [PATCH 10/10] ARM: dts: msm: Add TPDA and TPDM support to DTS for RB5

From: Mathieu Poirier
Date: Tue Nov 02 2021 - 14:02:45 EST


On Thu, Oct 21, 2021 at 03:38:56PM +0800, Tao Zhang wrote:
> Add TPDA and TPDM support to DTS for RB5 board. This change is a
> sample for validating. After applying this patch, the new TPDM and
> TPDA nodes can be observed at the coresight devices path. TPDM and
> TPDA hardware can be operated by commands.
>
> List the commands for validating this series patches as below.
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
> echo 0 > /sys/bus/coresight/devices/tpdm0/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm1/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm1/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm1.bin
> echo 0 > /sys/bus/coresight/devices/tpdm1/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm2/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm2/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm2/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm2.bin
> echo 0 > /sys/bus/coresight/devices/tpdm2/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
>
> If the data from TPDMs can be obtained from the ETF, it means
> that the TPDMs verification is successful. At the same time,
> since TPDM0, TPDM1 and TPDM2 are all connected to the same
> funnel "funnel@6c2d000" and output via different output ports,

Where is "funnel@6c2d000" in this patch?

> it also means that the following patches verification is
> successful.
> coresight: add support to enable more coresight paths
> coresight: funnel: add support for multiple output ports
>
> Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 439 +++++++++++++++++++++++
> 1 file changed, 439 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 8ac96f8e79d4..bcec8b181e11 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -222,6 +222,445 @@
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
> +
> + stm@6002000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0 0x06002000 0 0x1000>,
> + <0 0x16280000 0 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint =
> + <&funnel0_in7>;
> + };
> + };
> + };
> + };
> +
> + funnel@6041000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0x06041000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + funnel0_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in0>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@7 {
> + reg = <7>;
> + funnel0_in7: endpoint {
> + remote-endpoint = <&stm_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@6042000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0x06042000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + funnel2_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in2>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@4 {
> + reg = <4>;
> + funnel2_in5: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@6b04000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + arm,primecell-periphid = <0x000bb908>;
> +
> + reg = <0 0x6b04000 0 0x1000>;
> + reg-names = "funnel-base";
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&etf_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@7 {
> + reg = <7>;
> + swao_funnel_in7: endpoint {
> + slave-mode;
> + remote-endpoint=
> + <&merg_funnel_out>;
> + };
> + };
> + };
> +
> + };
> +
> + funnel@6045000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0x06045000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + merg_funnel_out: endpoint {
> + remote-endpoint = <&swao_funnel_in7>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&funnel0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + merge_funnel_in2: endpoint {
> + remote-endpoint =
> + <&funnel2_out>;
> + };
> + };
> + };
> + };
> +
> + etf@6b05000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0x06b05000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + in-ports {
> + port {
> + etf_in: endpoint {
> + remote-endpoint =
> + <&merge_funnel_out>;
> + };
> + };
> + };
> + };
> +
> + etm@7040000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07040000 0 0x1000>;
> +
> + cpu = <&CPU0>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + etm@7140000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07140000 0 0x1000>;
> +
> + cpu = <&CPU1>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + etm@7240000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07240000 0 0x1000>;
> +
> + cpu = <&CPU2>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in2>;
> + };
> + };
> + };
> + };
> +
> + etm@7340000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07340000 0 0x1000>;
> +
> + cpu = <&CPU3>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in3>;
> + };
> + };
> + };
> + };
> +
> + etm@7440000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07440000 0 0x1000>;
> +
> + cpu = <&CPU4>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm4_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in4>;
> + };
> + };
> + };
> + };
> +
> + etm@7540000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07540000 0 0x1000>;
> +
> + cpu = <&CPU5>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm5_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in5>;
> + };
> + };
> + };
> + };
> +
> + etm@7640000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07640000 0 0x1000>;
> +
> + cpu = <&CPU6>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm6_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in6>;
> + };
> + };
> + };
> + };
> +
> + etm@7740000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x07740000 0 0x1000>;
> +
> + cpu = <&CPU7>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + out-ports {
> + port {
> + etm7_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel_in7>;
> + };
> + };
> + };
> + };
> +
> + funnel@7800000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0x07800000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + apss_funnel_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel_in0: endpoint {
> + remote-endpoint =
> + <&etm0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel_in1: endpoint {
> + remote-endpoint =
> + <&etm1_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + apss_funnel_in2: endpoint {
> + remote-endpoint =
> + <&etm2_out>;
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> + apss_funnel_in3: endpoint {
> + remote-endpoint =
> + <&etm3_out>;
> + };
> + };
> +
> + port@4 {
> + reg = <4>;
> + apss_funnel_in4: endpoint {
> + remote-endpoint =
> + <&etm4_out>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + apss_funnel_in5: endpoint {
> + remote-endpoint =
> + <&etm5_out>;
> + };
> + };
> +
> + port@6 {
> + reg = <6>;
> + apss_funnel_in6: endpoint {
> + remote-endpoint =
> + <&etm6_out>;
> + };
> + };
> +
> + port@7 {
> + reg = <7>;
> + apss_funnel_in7: endpoint {
> + remote-endpoint =
> + <&etm7_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@7810000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0x07810000 0 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + apss_merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&funnel2_in5>;
> + };
> + };
> + };
> +
> + in-ports {
> + port {
> + apss_merge_funnel_in: endpoint {
> + remote-endpoint =
> + <&apss_funnel_out>;
> + };
> + };
> + };
> + };

Which of the above introduces TPDM and TPDA devices?

More comments to come tomorrow.

Thanks,
Mathieu

> };
>
> &adsp {
> --
> 2.17.1
>