[PATCH] media: aspeed: use reset to replace clk off/on

[Jammy Huang]

reset should be more proper than clk off/on to bring HW back to good
state.

Signed-off-by: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
---
 drivers/media/platform/aspeed-video.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index fea5e4d0927e..10d182139809 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -23,6 +23,7 @@
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
 #include <linux/ktime.h>
+#include <linux/reset.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-device.h>
@@ -220,6 +221,7 @@ struct aspeed_video {
 	void __iomem *base;
 	struct clk *eclk;
 	struct clk *vclk;
+	struct reset_control *reset;
 
 	struct device *dev;
 	struct v4l2_ctrl_handler ctrl_handler;
@@ -554,6 +556,13 @@ static void aspeed_video_on(struct aspeed_video *video)
 	set_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
 
+static void aspeed_video_reset(struct aspeed_video *v)
+{
+	reset_control_assert(v->reset);
+	udelay(100);
+	reset_control_deassert(v->reset);
+}
+
 static void aspeed_video_bufs_done(struct aspeed_video *video,
 				   enum vb2_buffer_state state)
 {
@@ -574,7 +583,9 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 	set_bit(VIDEO_RES_CHANGE, &video->flags);
 	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
 
-	aspeed_video_off(video);
+	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
+	aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
+	aspeed_video_reset(video);
 	aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
 
 	schedule_delayed_work(&video->res_work, delay);
@@ -1507,8 +1518,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
 		 * Need to force stop any DMA and try and get HW into a good
 		 * state for future calls to start streaming again.
 		 */
-		aspeed_video_off(video);
-		aspeed_video_on(video);
+		aspeed_video_reset(video);
 
 		aspeed_video_init_regs(video);
 
@@ -1715,6 +1725,12 @@ static int aspeed_video_init(struct aspeed_video *video)
 		return rc;
 	}
 
+	video->reset = devm_reset_control_get(dev, NULL);
+	if (IS_ERR(video->reset)) {
+		dev_err(dev, "Unable to get reset\n");
+		return PTR_ERR(video->reset);
+	}
+
 	video->eclk = devm_clk_get(dev, "eclk");
 	if (IS_ERR(video->eclk)) {
 		dev_err(dev, "Unable to get ECLK\n");
-- 
2.25.1