Re: [PATCH 2/2] net: ethernet: Add driver for Sunplus SP7021

[Philipp Zabel]

On Wed, 2021-11-03 at 19:02 +0800, Wells Lu wrote:
[...]
> diff --git a/drivers/net/ethernet/sunplus/l2sw_driver.c b/drivers/net/ethernet/sunplus/l2sw_driver.c
> new file mode 100644
> index 0000000..3dfd0dd
> --- /dev/null
> +++ b/drivers/net/ethernet/sunplus/l2sw_driver.c
> @@ -0,0 +1,779 @@
[...]
> +static int l2sw_probe(struct platform_device *pdev)
> +{
> +	struct l2sw_common *comm;
> +	struct resource *r_mem;
> +	struct net_device *net_dev, *net_dev2;
> +	struct l2sw_mac *mac, *mac2;
> +	u32 mode;
> +	int ret = 0;
> +	int rc;
> +
> +	if (platform_get_drvdata(pdev))
> +		return -ENODEV;
> +
> +	// Allocate memory for l2sw 'common' area.
> +	comm = kmalloc(sizeof(*comm), GFP_KERNEL);

I'd use devm_kzalloc() here for initialization and to simplify the
cleanup path.

> +	if (!comm)
> +		return -ENOMEM;
> +	pr_debug(" comm = %p\n", comm);

What is this useful for?

> +	memset(comm, '\0', sizeof(struct l2sw_common));

Not needed with kzalloc, See above.

[...]
> +	// Get memory resoruce 0 from dts.
> +	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (r_mem) {
> +		pr_debug(" res->name = \"%s\", r_mem->start = %pa\n", r_mem->name, &r_mem->start);
> +		if (l2sw_reg_base_set(devm_ioremap(&pdev->dev, r_mem->start,
> +						   (r_mem->end - r_mem->start + 1))) != 0) {
> +			pr_err(" ioremap failed!\n");
> +			ret = -ENOMEM;
> +			goto out_free_comm;
> +		}
> +	} else {
> +		pr_err(" No MEM resource 0 found!\n");
> +		ret = -ENXIO;
> +		goto out_free_comm;
> +	}
> +
> +	// Get memory resoruce 1 from dts.
> +	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	if (r_mem) {
> +		pr_debug(" res->name = \"%s\", r_mem->start = %pa\n", r_mem->name, &r_mem->start);
> +		if (moon5_reg_base_set(devm_ioremap(&pdev->dev, r_mem->start,
> +						    (r_mem->end - r_mem->start + 1))) != 0) {
> +			pr_err(" ioremap failed!\n");
> +			ret = -ENOMEM;
> +			goto out_free_comm;
> +		}
> +	} else {
> +		pr_err(" No MEM resource 1 found!\n");
> +		ret = -ENXIO;
> +		goto out_free_comm;
> +	}

Using devm_ioremap_resource() would simplify both a lot.

[...]
> +	comm->rstc = devm_reset_control_get(&pdev->dev, NULL);

Please use devm_reset_control_get_exclusive().

> +	if (IS_ERR(comm->rstc)) {
> +		dev_err(&pdev->dev, "Failed to retrieve reset controller!\n");
> +		ret = PTR_ERR(comm->rstc);
> +		goto out_free_comm;
> +	}
> +
> +	// Enable clock.
> +	clk_prepare_enable(comm->clk);
> +	udelay(1);
> +
> +	ret = reset_control_assert(comm->rstc);

No need to assign to ret if you ignore it anyway.

> +	udelay(1);
> +	ret = reset_control_deassert(comm->rstc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to deassert reset line (err = %d)!\n", ret);
> +		ret = -ENODEV;
> +		goto out_free_comm;
> +	}
> +	udelay(1);

regards
Philipp