[PATCH v7 1/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.

[Jim Quinlan]

The "pcie" and "msi" interrupts were given the same interrupt when they are
actually different.  Interrupt-map only had the INTA entry; the INTB, INTC,
and INTD entries are added.

Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index b9589a0daa5c..508e5dce1282 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -142,11 +142,15 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-- 
2.17.1