Re: [net-next] net: dsa: qca8k: only change the MIB_EN bit in MODULE_EN register

[Vladimir Oltean]

On Thu, Nov 04, 2021 at 01:49:27PM +0100, Robert Marko wrote:
> From: Gabor Juhos <j4g8y7@xxxxxxxxx>
> 
> The MIB module needs to be enabled in the MODULE_EN register in
> order to make it to counting. This is done in the qca8k_mib_init()
> function. However instead of only changing the MIB module enable
> bit, the function writes the whole register. As a side effect other
> internal modules gets disabled.
> 
> Fix up the code to only change the MIB module specific bit.
> 
> Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
> Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> ---
>  drivers/net/dsa/qca8k.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index a984f06f6f04..a229776924f8 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -583,7 +583,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
>  	if (ret)
>  		goto exit;
>  
> -	ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
> +	ret = qca8k_reg_set(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
>  
>  exit:
>  	mutex_unlock(&priv->reg_mutex);
> -- 
> 2.33.1
> 

You should have copied the original patch author too. Adding him now.