Re: [PATCH v3] ARM: dts: aspeed: tyan-s7106: Update nct7802 config

[Joel Stanley]

On Fri, 5 Nov 2021 at 03:29, Oskar Senft <osk@xxxxxxxxxx> wrote:
>
> This change updates the configuration for the nct7802 hardware
> monitor to correctly configure its temperature sensors.
>
> Signed-off-by: Oskar Senft <osk@xxxxxxxxxx>

Thanks, applied.


> ---
> Changes from PATCH v2:
> - Add missing address-cells, size-cells configuration.
> - Add missing new line between channel 0 and 1.
>
> Changes from PATCH v1:
> - Removed superfluous "status" from channels.
> ---
>  arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 24 +++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> index 68f332ee1886..60ac6d3f03b5 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> @@ -213,6 +213,30 @@ &i2c0 {
>         nct7802@28 {
>                 compatible = "nuvoton,nct7802";
>                 reg = <0x28>;
> +
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               channel@0 { /* LTD */
> +                       reg = <0>;
> +               };
> +
> +               channel@1 { /* RTD1 */
> +                       reg = <1>;
> +                       sensor-type = "temperature";
> +                       temperature-mode = "thermistor";
> +               };
> +
> +               channel@2 { /* RTD2 */
> +                       reg = <2>;
> +                       sensor-type = "temperature";
> +                       temperature-mode = "thermistor";
> +               };
> +
> +               channel@3 { /* RTD3 */
> +                       reg = <3>;
> +                       sensor-type = "temperature";
> +               };
>         };
>
>         /* Also connected to:
> --
> 2.34.0.rc0.344.g81b53c2807-goog
>