[RFC PATCH 6/6] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Ansuel Smith]

Add LEDs definition example for qca8k using the offload trigger as the
default trigger and add all the supported offload triggers by the
switch.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 48de0ace265d..d8394f625d03 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -64,6 +64,8 @@ properties:
                  internal mdio access is used.
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
+                 Each phy have at least 3 LEDs connected and can be declared
+                 using the standard LEDs structure.
 
     properties:
       '#address-cells':
@@ -340,6 +342,34 @@ examples:
 
                 internal_phy_port1: ethernet-phy@0 {
                     reg = <0>;
+
+                    leds {
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "offload-phy-activity";
+                            linux,supported-offload-triggers = "rx-blink", "tx-blink", "ollision-blink",
+                                                        "link-10M", "link-100M", "link-1000M",
+                                                        "half-duplex", "full-duplex", "linkup-over",
+                                                        "power-on-reset", "blink-2hz", "blink-4hz",
+                                                        "blink-8hz", "blink-auto";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "offload-phy-activity";
+                            linux,supported-offload-triggers = "rx-blink", "tx-blink", "ollision-blink",
+                                                        "link-10M", "link-100M", "link-1000M",
+                                                        "half-duplex", "full-duplex", "linkup-over",
+                                                        "power-on-reset", "blink-2hz", "blink-4hz",
+                                                        "blink-8hz", "blink-auto";
+                        };
+                    };
                 };
 
                 internal_phy_port2: ethernet-phy@1 {
-- 
2.32.0