Re: [PATCH 4/4] bq25890_charger: Enable continuous conversion for ADC at charging

[Hans de Goede]

Hi,

On 11/7/21 21:20, Yauhen Kharuzhy wrote:
> Instead of one shot run of ADC at beginning of charging, run continuous
> conversion to ensure that all charging-related values are monitored
> properly (input voltage, input current, themperature etc.).
> 
> Signed-off-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx>

Thank you for finding this! This explains why all the ADC returned
values like current_now where 0 when charging, I thought this was
just something which was only supported while not charging, heh.

As before, the patch subject prefix should be: "power: supply: bq25890: "

Otherwise the patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Sebastian, this really is a pure bug-fix patch, any chance you
can pick this up for a future 5.16-rc# pull-req ? 

Regards,

Hans




> ---
>  drivers/power/supply/bq25890_charger.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
> index fb2f1578503c..26ac7cde8c02 100644
> --- a/drivers/power/supply/bq25890_charger.c
> +++ b/drivers/power/supply/bq25890_charger.c
> @@ -609,12 +609,12 @@ static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
>  
>  	if (!new_state.online && bq->state.online) {	    /* power removed */
>  		/* disable ADC */
> -		ret = bq25890_field_write(bq, F_CONV_START, 0);
> +		ret = bq25890_field_write(bq, F_CONV_RATE, 0);
>  		if (ret < 0)
>  			goto error;
>  	} else if (new_state.online && !bq->state.online) { /* power inserted */
>  		/* enable ADC, to have control of charge current/voltage */
> -		ret = bq25890_field_write(bq, F_CONV_START, 1);
> +		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
>  		if (ret < 0)
>  			goto error;
>  	}
>